This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Ultima Superior ST/100 Safety Tig Welding Gauntlets Size 10
Tig welding gauntlets made from very soft and comfortable Nappa leather, allowing for the higher level of dexterity required.
The radical design which incorporates fewer stitched seams -particularly relevant on the "wrap around thumb and forefinger" - than the traditional Tig gauntlets, results in far more resilient glove which lasts considerably longer.
Unlined
Red cuff
Size: 10
Conform to: EN 388 2111 EN 407 212X3X EN 12477:2001/A1:2005
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 2The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 1Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN407 Protection Against Thermal Risks: Heat/FireThis standard specifies thermal performance for protective gloves against heat and/or fire.
EN12477 Protection Gloves Against Molted Metal SplashDesigned to be used during welding operations and allied processes. It includes EN 420 requirements to ensure that the gloves themselves do not cause harm to the wearer.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
Click here for the Delivery & Returns information.