3M Peel Off Visor for 3M HT-402 Respiratory Helmet

3M Removable / Peel Off protective film for 3M HT-400 Visor with QSR coupling and 3M vision headgear.

Easy to apply with two self-adesive strips.

Easy to peel off by the side tab.

The Visor Cover fits over the standard visor and protects it from scratching or overspray of paint and chemicals.

This will extend the lifetime of your 3M visor.

3M 4002226-OP made to fit for all HT-400 series with QSR coupling and 3M vision headgear.

Portwest P976 ABEK2P3 Combination Filter Cartridge

This anti-gas and anti-particles filter is equipped with a standard threaded connection conforming to EN 148-1 and can be used on full face masks with the same connection.

It protects from organic and inorganic acid gases and vapours, sulphur dioxide, ammonia and its derivatives.

Classified as a class 2 filter for gases and class 3 for particles, it can be used to protect against harmful substances, solvents, toxic particles and micro-organisms.

Conforms to: EN 148 -1 EN 14387 Type ABEK (Class 2) EN 14387 Type P (Class 3).

Supplied in packs of 4 filters cartridges.

Portwest PS90 Faceshield Clear Visor

Arc Flash Protection Class 1

It provides the maximum light transmittance and "improved colour recognition" as per EN 170.

This visor consists of a face shield with a bracket for slotted caps.

3M Pre-Filter Platforms 603

3M Platform (used to connect all 5000 Series filters to 3M reusable face masks).

The 3M 603 Filter Adapter is designed for use with 3M Particulate Filter 5935 and 3M Filter Retainer 501.

Compatible with the 3M 6000 and 7000 Series Half Mask respirators.

3M 5925 P2 Particulate Filters Pads for 6000 & 7000 Series Dust Masks

The 3M particulate filter 5925, can be used in industries where excess levels of particulates are present.

3M™ Particulate Filter offering P2 R protection against solid and liquid particles.

Designed for use in combination with 3M™ Gas and Vapour Filters 6000 Series using the 3M™ Filter Retainer 501 or used separately using a 3M™ 603 Filter Platform and a 3M™ Filter Retainer 501.

Particulate filter can be used in conjunction with 6000 Series Cartridge Filters

These filters are versatile, compatible with 6000, 7000 & 7500 series.

Filters can be used on all 3M™ Half and Full Face Masks fitted with a bayonet connections system.

3M 5925 P2 Particulate Filters conforms to EN 143:2001 Safety Standard.

Price per pair.

3M 6098 AXP3 R Gas Vapour and Particulate Filter Pack 1 Pair

Gas, Vapour and Particulate Filter 6098 protect against gases, vapours and particulates.

Suitable for use with the 3M 6000 and 3M 7907 Series Full Face Masks.

3M 6098 AXP3 R Gas Vapour and Particulate Filters conforms to: EN 14387 protection standard.

3M 6057 Twin Pack Cartridges ABE1 - Gas and Vapour Protection For 6000/7000 Masks

The 3M 6057 ABE1 Filters protect against organic vapours, inorganic vapours and acid gases.

Filters are specially designed to enable excellent field of vision and balance.

For use with all 6000, 7000 and 7500 Series half masks and full face masks.

Can be used in combination with the 3M 5000 particulate filters to provide combined particulate and vapour protection.

2 replacement filters per pack.

3M 6054 Cartridges Gas Vapour K1 Half Mask Respiratory Protection Cartridges

The 3M 6054 K1 Filters protects you against ammonia and its derivatives.

Filters are specially designed and shaped to give excellent field of vision and balance.

For use with all 6000, 7000 and 7500 series half masks and full face masks.

Can be used with the 3M™ 5000 Particulate Filters to provide combined particulate and vapour protection.

3M 6054 Gas & Vapour Filter conforms to EN 14387 Safety Standard.

Price per pair.

Moldex 8070 Pcm-00022 Particulate Filter P2RD

P2 Replacement pre-filter \ particulate filter for 5000 & 8000 Series mask.

Particulate filter with a unique pleated filter significantly reduces breathing resistance which improves wearer comfort and reduces fatigue.

Protects from dust and other airborne particles.

To be used in conjunction with either the Moldex 8090 or Moldex 8095 filter pad holders.

Moldex 8070 Pcm-00022 Particulate Filter P2 conforms to EN143.

3M 2138 P3R Particulate Disk Filters

Particulate 3M Filters 2138 protect against solids and liquid particles P3R.

With extra protection against acid and organic gases, vapours under limit, as well as ozone up to 10 x TLV.

Unique "Bayonet" fitting system ensures precise and safe locking.

3M 2138 P3R Particulate Disk Filters conforms to: EN143 : 2000, CE Approved.

Pack of 2 Disk Filters

3M 462-05-00P10 Dustmaster PAPR Systems Pre Filters

This Pre Filters is a component that fits into the 3M Dustmaster powered air purifying respirator (PAPR) Systems.

Pre Filters helps filter contaminants before they reach the filter.

Suitable for construction, welding, manufacturing, food processing and woodworking applications.

Pack of 10

3M Versaflo TR-3712E Particulate Filter P3

Very simple setup, the filter can be easily changed and by hand.

Conforms to EN12941 Safety Standard.

The TR-3712E is a high efficiency particulate (P3) filter for use with the 3M Versaflo Powered Air Purifying Respirator (PAPR), Series TR-300 Series.

3M A2 Organic Vapour Filter 6055

The 3M Vapour and Gas Cartridge 6055, protect against organic vapours.

Suitable for 3M 7000 and 3M 6000 Series Half and Full Face Masks.

Typical industrial applications are anywhere conventional paints are used: Aircraft manufacture, Ink and dye manufacturer, Paint and varnish manufacturer, Resin manufacturer or Vehicle manufacture.

3M A2 Organic Vapour Filter 6055 conforms to EN14387:2004 + A1:2008

Carton size: 8 Cartridges (4 Pairs)

3M 6059 ABEK1 Gas & Vapour Filter 1 Pair

Provides exceptional protection against gasses and organic vapours.

Compatible with 3M 6000 and 7000 series half & full face mask products.

Very simple setup process, also easy to remove.

Conforms to EN 14387:2004 Safety Standard.

3M 501 Filter Retainers (Pair)

Used for clamping particle pre-filters onto vapur and gas filters.

Compatible with 3M 5000 Series respirator, 6000 series cartridges & 3M 603 Filter adapter.

Measures 10.2cm (high) x 21.5cm (Long) x 11.4cm (Wide).

CE Approved.

3M 5935 P3 Dust & Mist Filters 1 Pair

The 3M particulate filter 5935, P3 can be used in industries where excess levels of particulates are present in the workplace atmosphere where gas / vapour protection is also required.

For use with a 3M 6000 filters to provide combined particulate and gas/vapour protection.

When used in this way, 3M 501 retainer covers are also required.

Conforms to EN 143 Safety Standards.

3M Breath Tube Cover QRS

3M quality Breath Tube Cover for respiratory systems.

You can extend the service life of the breathing tube by using a QRS tube cover.

Single Cover

3M Versaflo Male Rectus Fitting 5301252P3

3M Versaflo rectus plug belt unit coupling quarter inch BSP male thread for powered respiratory system.

Portwest P956 Combination Filter Cartridges A2P3 Universal Tread

The P956 is A2P3 type combined filter, equipped with a standard threaded connection conforming to EN 148-1 and can be used on full face masks with the same connection.

Classified as a class 2 filter for gases and class 3 for particles, it can be used to protect against harmful substances, solvents, toxic particles and micro-organisms

CE-CAT III

Standard thread connection (DIN) according to EN 148-1 standard

Lightweight and comfortable

Retail box which aids presentation for retail sales

Individually packed for vending machines

Conform to: EN 148 -1

EN 14387 Type A (Class 2)

EN 14387 Type P (Class 3)

Supplied in packs of 4 cartridges

Portwest P950 A1P3 Combination Filter Cartridges

Box of 4.

This filter is A1P3 type and protects against harmful substances, solvents, toxic particles and micro-organisms.

The screw-in system ensures a safe connection between the mask and the filter, while the twin filters offer improved comfort and balance.

This filter is compatible with the P410 Half Masks.

Portwest P900 A1 Gas Filter

Box of 6 Gas Filters.

A type class 1 gas filter and protects against organic gases and vapours where the boiling point is higher than 65°C.

It can also be used to protect against substances and solvents.

Equipped with special thread for pair use only, it can be used on P410 Half Mask only.

Portwest P941 P3 Particle Filter Cartridges

Box of 6 Cartridges.

This filter is a P3 R type and protects against toxic substances such as particles and microorganisms.

The special Portwest bayonet system ensures a safer connection between the mask and the filter while the twin filters offer improved comfort and balance.

This filter is compatible with the P500 Full Face masks and the P420, P430 Half Masks.

Portwest P971 ABEK1P3 Combination Filter Cartridges

This anti-gas and anti-particles filter protects from organic and inorganic acid gases and vapours, sulphur dioxide, ammonia and its derivatives.

Classified as a class 1 filter for gases and class 3 for particles, it can be used to protect against harmful substances, solvents, toxic particles and micro-organisms.

The special Portwest bayonet system ensures a safer connection between the mask and the filter.

This filter is compatible with half masks P420, P430 and Full Face masks model P500.

Scott Safety PF251/2 Filter Cartridges for Tornado Respiratory System

High efficiency particulate filters for use with Tornado powered respirators

Easy to mount

Maintenance free

Conform to: EN12941/2

Sundström SR 298 AX Gas Filter Cartridge

Gas filter SR 298 is designed for use with Sundström half masks and full-face masks.

The filter is of type AX and provides protection against organic gases and vapours, such as solvents, with boiling points ? +65 °C.

Operating temp. -10 \ +55 °C, < 90 % RH.

Storage temp. -20 \ +40 °C, < 90 % RH.

Sundström SR 298 AX Gas Filter Cartridge conforms to: EN 14387:2004 + A1:2008 standard.