This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Polyco HexArmor GGT5 Gator Grip 4020 CUT & Impact Protection Work Gloves
HexArmor GGT5 Gator Grip 4020X Gloves are manufactured to provide cut, puncture, and impact protection.
These gloves are designed to protect the major injury points - finger pinching, severe cuts, abrasions, and crush injuries.
Excellent grip capabilities designed to cope with wet, grease and similar situations.
Gator Grip Technology® prevents formation of oil film and displaces oil, allowing maximum contact with tools and other surfaces in saturated conditions Puncture protection from wickers, burrs and cable wire.
Full Impact Exoskeleton™ with high performance IR-X smash guards provides greater impact protection.It also includes high visibility colours for increased safety.
Made with SuperFabric brand material which gives the highest cut resistance protection, SuperFabric brand material specially developed for the oil and gas industry.
Polyco HexArmor GGT5 Grip 4020 Impact Protection Glove conforms to: EN388 4.5.4.2 Cut Level 5.
Disclaimer: please note the images shown are for illustration purposes only; the colours / design may be subject to changes by the manufacturer.
Features
- Abrasion resistant
- Cut resistant
- Tear resistant
- EN 420:2003 test for comfort and fit and dexterity
- EN 388:2003. These gloves have an ANSI puncture rating of Level 3.
- Shell: 54% Nylon, 15% Neoprene, 13% Polyurethane, 5% Plastic, 4% Polyester
- EVA Foam, 3% PVC, 1% Silicone, 1% Spandex, 1% Cotton
- Liner: 100% Cotton
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 5Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
Michael : 2016-11-22
The best work gloves I have at work.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Polyco gloves. Also you can check for more Gloves here - Gloves. More safety products - you can check out our PPE Category.