This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Polyco HexArmor 4026 Safety Gloves Impacts & Level-5 Cut Protection
Cut resistant glove made of SuperFabric® brand material, with PVC dots on the palm and impact protection to the back of the hand.
SuperFabric® brand material within the palm provides EN388 Level 5 cut resistance and maintains the highest level of protection
Superior back of hand impact protection system utilises an advanced design to dissipate forceful blows over a large area
Synthetic leather palm with abrasion resistant PVC dots provides reliable grip in dry or light oil situations
High visibility colour and reflective tape on the back of the hand
Elasticated cuff with Velcro® closure for a secure fit
Pull tab
Reinforced seams
Form-fitting quality materials for high dexterity
Machine washable 40ºC
Conform to: EN 388:2016 4X21FP EN 388:2003 4521 EN 420:2003 + A1:2009 Cat. II
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 5Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
Click here for the Delivery & Returns information.