This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Impact on postal service - National Strike action is expected to affect Royal Mail services on November and December 2022.
Polyco HexArmor Rig Lizard Impact Cut & Puncture Protection Work Gloves
Durable TP-X® palm has the highest-level abrasion resistance while maintaining oil-resistant grip.
Synthetic palm with unique stitching pattern offers comfort and dexterity.
Full Impact Exoskeleton™ with high-performance IR-X® smash guards offers greater impact protection.
Additional IR-X® guard between thumb and index finger gives secure common pinch and catch points.
Reinforced index finger and thumb crotch lengthens glove life.
Exterior seams implement a double stitched core-spun thread, adds further durability and longevity.
SlipFit® cuff adds comfort and convenience.
Hi-vis colour scheme increases visual awareness in low light areas.
Polyco HEX2021 HexArmor Rig Lizard Impact & Puncture Protection Glove conform to standard: EN 388 4.2.4.3 safety standards.
Features
- Cut resistant
- Breathable SlipFit cuff
- ISEA Level 3 cut and puncture protection
- IR-X smash guards
- IR-X guard between thumb and index finger
- Durable TP-X palm
- Reinforced seams
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 2Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 3Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Polyco gloves. Also you can check for more Gloves here - Cut resistance Gloves- Level 3. More safety products - you can check out our Chainsaw | Forestry Jackets Category.