This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Impact on postal service - National Strike action is expected to affect Royal Mail services on November and December 2022.
ATG MaxiCut Oil Palm Coated 34-304 Gloves
MaxiCut® Oil™ combines cut protection with comfort, flexibility and dexterity for oily and wet environments.
Innovative fibres blended to offer cut protection whilst maintaining high levels of comfort.
Reinforcement between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area.
Form, fit and feel mimics the “hand at rest”, reducing hand fatigue and increasing comfort.
Latest knitting technologies utilized to produce smooth and rounded fingertips, improving fingertip sensitivity.
Consistent liner penetration from the nitrile, leaving only the soft liner resting against the skin.
Coating: NBR (Nitrile Butadiene Rubber)
Coating texture: Micro-Foam with Non-Slip Grip
Liner: Glass, Nylon, Polyester, Spandex
Palm thickness: 1.30 mm
Conform to: EN 420:2003 + A1:2009 EN 388:2016 4331B EN 388:2003 4331
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 3Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 3Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from ATG gloves. Also you can check for more Gloves here - Shelby FR Gloves. More safety products - you can check out our Jackets Category.