This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
ATG Maxiflex Elite Palm Coated 34-274 Gloves
Ideal for dry or slightly oily applications, which requires high dexterity, excellent grip and maximum fingertip sensitivity for precision handling.
36% lighter and 30% thinner than traditional foam nitrile gloves.
360° breathability, making it the most breathable glove on the market today.
Conclusion: MaxiFlex® has outstanding durability withstanding 18.000 abrasive cycles per millimetre thanks to the use of the DuraTech® coating technology in the coating construction.
Per millimetre of coating MaxiFlex® has over twice the abrasion resistance of other gloves in its class. We are going to see a lot more of these gloves in use!
Features
- Palm Thickness: 0.75mm
- Length: 25cm
- Liner: stretch nylon
- Coating: nitrile butadiene rubber
- Optimized grip
- Micro-cup finish
- Conform To: EN420:2003 EN388:2003 4.1.2.1.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from ATG gloves. Also you can check for more Gloves here - ATG Gloves. More safety products - you can check out our Work Shorts Category.