This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Marigold Puretough P3000 Cut 3 Resistant Nitrile-PU Coated Wet Grip Work Gloves
Superb tactile handling glove.
Non slip grip along with Water and oil repellent coating.
Made from high performance and high visible fibres, using Techcor® Knitting Technology.
Sensitive grey water based mix synthetic compound palm fit coating.
Water and oil repellent treatment on both liner and coating.
Ideal for use in all mechanical handling applications.
Suitable for use in medium level thermal hazards.
Level 3 cut Resistant standard.
Marigold Puretough P3000 11-423 Glov approved to: BS EN 388:2003 4.3.3.2 and EN 407:2004. safety standards.
Features
- Water and oil repellent liner and coating.
- Great grip in dry and oily conditions.
- Silicone free and DMF free.
- Lint free ensures no product contamination.
- Seamless knitted liner for comfort.
- Conforms to EN388 & EN407
- Resistant against Mechanical Hazzards.
- Resistant to thermal Heat Hazzards
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 3Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 3Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
Nathan Thomson : 2016-08-22
Packaging was ok ... but the gloves are excellent
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Ansell gloves. Also you can check for more Gloves here - Vibration Protection Gloves. More safety products - you can check out our High Visibility Trousers Category.