This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Mechanix HMG-05 Original 0.5mm Protective Glove
When you need the tactile control of bare hands while still wearing gloves, try the Original 0.5
Mechanix Wear's most dexterous glove yet.
Mechanix most dexterous glove features a 0.5mm synthetic leather palm for superior feel and pinpoint precision with intricate tasks.
Stretch Spandex forms comfortably to the top of your hand creating a second-skin fit for maximum control in any situation.
Mechanix HMG-05 Increased Grip Protection Glove conforms to: EN 420 EN 388 3.1.1.1. hand protection standards.
Features
- Protects hands from heat and cold.
- Providing increased grip and finger sensitivity.
- Heat-resistant Clarino® palm and index finger.
- Wide elastic wrist band.
- Padded 3-ply mesh top.
- Anatomical 3/4-closed design.
- Treated with a rubber coating to improve strength and grip.
- Thinner Clarino in palm and fingers for better feel and dexterity.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 3The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 1Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Mechanix gloves. Also you can check for more Gloves here - Impact Protection Gloves. More safety products - you can check out our Chefs Trousers Category.