This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Ansell ActivArmr 97-210 Offshore Work Gloves Impact Protection Waterproof Size 11
The 97-210 impact barrier, grip glove is designed to meet the extreme conditions of the rig floor, rig services and hydraulic fracking, the toughest conditions in the oilfield.
With lab tested state of the art impact protection on the back of hand, the gloves also provide technologically advanced “enhance grip” pads in strategic palm pressure points.
Also offers a water-resistant barrier to protect hands from fluids encountered in the upstream environment.
With the Ansell ActivArmr 97-210 you get it all: oily, dry and wet grip, cut protection, abrasion and protection from oil & water penetration.
Construction: Cut & Sewn
Liner material: Polyester
Finishing: Leather Palm, Thermoplastic Rubber
Cuff style: safety cuff
Length (mm): 294
Size: 11 – 2XL
Conforms to: EN 420:2003 + A1:2009 Cat. II EN 388:2003 2.2.2.2.
Features
- Enhanced grip pads
- Water resistant barrier
- Protection from oil & water penetration
- Leather palm
- Thermoplastic rubber
- Polyester Lining
- Safety cuff
- Good oil and wet grip
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 2The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 2Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
steve graham : 2016-05-27
Fantastic Gloves !!
Add your review
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Ansell gloves. Also you can check for more Gloves here - Showa Safety Gloves. More safety products - you can check out our Firefighter Clothing Category.