This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Polyco 4021 HexArmor GGT5 Cut and Impact Resistance Mud Hi-vis Orange Glove Size 8
Cut resistant glove made of SuperFabric brand material specially developed for the oil and gas industry.
Made with SuperFabric brand material, the palm provides EN388 Cut Level 5 resistance and maintains the highest level of protection
Mud Grip synthetic leather palm with PVC dots works well with light/medium oil-based muds
Puncture protection from wickers, burrs and cable wire
Full impact Exoskeleton with high performance IR-X smash guards provides greater impact protection
Durable TP-X palm utilises the highest-level abrasion resistance while maintaining an oil resistant grip
Breathable SlipFit cuff with pull tab and name tag
High visibility colour scheme increases visual awareness
Conform to: EN 420:2003 + A1:2009 Cat. II EN 388:2016 4X44FP
EN 388:2003 4544
Available in size 8 only
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 5Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.