This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Polyco Bodyguards GH370 Nitrile Palm Coated High Grip Cut Resistant Gloves
The nitrile coating improves the overall grip the glove has to offer.
Polyco Bodyguards GH370 reusable glove has a Lightweight String Knit Liner with Foamed Nitrile Palm Coating for resistance to cuts and good grip.
Manufactured with an elasticated knit wrist providing a secure comfortable fit.
The tight fitting design allows the user to move around freely without hindrance.
Suitable for a wide range of applications such as glass or metal sheets handling, automotive, assembly, warehousing and construction.
Polyco Bodyguards GH370 Cut Resistant Work Gloves conform to: EN407 and EN388 4.5.4.4 safety standards.
Features
- Cut Level 5.
- Nitrile Coated.
- Elasticated Knit Wrist.
- Tight Fitting.
- Lightweight liner.
- Excellent grip on oily surfaces.
- Conforms to EN388.
- Safety Grades : 4.5.4.4.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 5Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 4Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Polyco gloves. Also you can check for more Gloves here - General Handling Gloves. More safety products - you can check out our Hi-Vis Workwear Category.