This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
( 0 - £0.00 )
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
You Are Here: Homepage
/ / / / Wenaas Odin 6-6611 CutMaster +Dyneema Unisex Gloves Cut 4 High Abrasion & Cut Resistance 4.4.4.2
Wenaas 6-6611 CutMaster+ Dyneema Hand Safety Cut 4 Resistant Work Gloves
CutMaster +Dyneema is a glove, with the high resistance to cuts and punctures.
Cut Level 4 Protection, with excellent wet grip - thanks to the micro nitrile-foam coating.
Wenaas are the Norwegian Safety Experts.
We don't believe you'll find a better priced Cut 4 glove, certainly not with the Wenaas brand.
Wenaas Odin 6-6611 Cut Master Plus glove compliant to EN 420 and EN 388 4.4.4.2 standards.
Conclusion: This is a brilliantly dexterous Cut 4 protection glove, affording the highest level of certified CUT protection.
Features
- Granulated Micro Foam Nitrile coated glove.
- Excellent wet grip.
- High Cut 4 Level.
- Offers superior fit.
- High Abrasion Resistance.
- Improved palm and wrist design.
- Material Composition: Nitrile, HPPE, glass fibre, Spandex, Nylon.
- Conforms to: EN 420, EN 388.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 4Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.