This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
.jpg)
.jpg)
.jpg)
.JPG)
.jpg)
ATG 34-800 MaxiFoam Extreme Wet & Dry Grip Nitrile Palm Coated Work Gloves
Manufactured with a grey nitrile coated palm & Fingers for improved grip and durability.
Designed to produce very little lint and dust lowering the chances of product contamination
Exceptionally comfortable construction with a seamless nylon liner.
The surface of the glove designed to “channel” oil away and give a better grip.
The light coating gives improved flexibility and dexterity.
MaxiFoam provides level 4 abrasion resistance and overall good levels of mechanical performance.
The glove minimal strikethrough reduces irritation and increases comfort levels.
Ideal for handling small oily components & general assembly.
ATG G-TEK 34-800 Maxi foam Nitrile Coated Glove conforms to EN420:2003 and EN388 4.1.3.1 standards.
Features
- Seamless knit Nylon Liner
- G-TEK MaxiFoam nitrile coated.
- Excellent Grip in Wet or Dry Conditions
- Produces minimal lint and dust
- Penetration Resistant
- Silicone Free
- Standards: 21CFR, 170-199.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 3Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
Charlie : 2017-02-01
Really nice product. The delivery was quite fast. Nothing on the negative side. Cheers.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from ATG gloves. Also you can check for more Gloves here - Marigold Gloves. More safety products - you can check out our Base Layer Undergarments Category.