This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Polyco Grip ItŪ C1 Oil Chemical Resistant Gauntlets
Seamless knitted chemical resistant gauntlet with dual nitrile coating.
A flexible and robust glove that utilises two layers of nitrile coating to provide ultimate grip, abrasion protection and durability
The palm coating is infused with micro-foam bubbles increasing resistance to oils and maximising grip in wet and oily handling environments
Provides good protection against a wide range of chemicals, including strong detergents, oils and certain solvents
Resilient dual nitrile coating and soft seamless knitted liner provides an ultimate level of comfort
Tested in accordance with European standard EN1186 making it suitable for food contact
Heat resistant up to 250°C or Contact Heat Level 2, EN:407:2004
Conform to: EN 388:2016 4121X EN ISO 374-5:2016 EN ISO 374-1:2016/ Type A KLMNOP EN 407:2004 X2XXX EN 420:2003 + A1:2009 Cat. III
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN374 Protection Gloves Against ChemicalsTested and approved chemical gloves. Standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
EN407 Protection Against Thermal Risks: Heat/FireThis standard specifies thermal performance for protective gloves against heat and/or fire.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
Click here for the Delivery & Returns information.