This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Polyco Reflex G5 KD Cut Resistant 3/4 Latex Coated Work Gloves
The seamless knitted Tensilite® liner has the highest level of cut resistance.
European standard EN388 Cut Level 5 resistant work glove.
The yarn is made with a soft finish providing superb comfort to the wearer
Elasticated at the wrist to ensure a tight, secure fit.
The 3/4 latex coating gives excellent grip in dry and wet conditions.
Puncture Resistant - Flexible latex coating offers added protection against puncture hazards.
Cut Resistant - The seamless Tensilite® liner provides high levels of cut resistance.
Comfort - The yarn is made with a soft finish to provide exceptional comfort to the wearer.
Grip - Excellent grip in wet and dry conditions.
Flexible - Latex coating offers high flexibility.
Polyco Reflex G5 KD Cut Resistant Latex Coated Gloves conforms to: EN 420 Cat. III EN 388 3.5.4.2. safety gloves standards.
Features
- Latex coating protects against puncture hazards
- High cut resistant liner
- Soft yarn finish for exceptional comfort
- Excellent grip in wet and dry conditions
- Tensilite liner provides high levels of cut resistance
- Conforms to: EN 420, EN 388
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 3The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 5Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Polyco gloves. Also you can check for more Gloves here - Welding Gloves and Heat Resistant Gloves. More safety products - you can check out our Outdoor Jackets | Coats Category.