This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Ansell Ultrablade UB10 Cut Resistant Level5 Non Absorbent Dyneema Butcher Gloves
Manufactured from lightweight spectra fibre. The fibres used improve the products durability.
Secure fit, designed with a seamless knit improving comfort and security.
Achieves the highest level of cut protection at level 5.
Non-absorbent which makes this glove ideal for the food industry.
Ansell Marigold Industrial Limited Ub10 Anti Cut Ultrablade Glove conforms to EN 420 Cat. III EN 388 4.5.4.X EN 407 X1XXXX safety standards.
Features
- Lightweight.
- Spectra Fibre.
- Seamless Knit.
- Comfortable.
- Highest Level of Cut.
- Non-absorbant.
- Ideal for handling food.
- Conforms to EN388 4.5.4.X.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 3The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 5Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN407 Protection Against Thermal Risks: Heat/FireThis standard specifies thermal performance for protective gloves against heat and/or fire.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
Ryan O'Neil : 2016-06-10
Class pair of gloves the cut level is why i bought them and it lives up to the standard i expected , Class job
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from marigold gloves. Also you can check for more Gloves here - Cut resistance Gloves- Level 1 \ 2. More safety products - you can check out our Disposable Overalls Category.