This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Showa 690 PVC Chemical Oil Resistant Hand Proterction Long Sleeve Gauntlets
Fully coated glove with additional coating over hand area, Antibacterial and anti-odour treatment.
A flexible, soft and comfortable design glove that absorbs perspiration, for ultra-comfortable extended wear and with good mechanical resistance.
Seals and protects the hand against chemicals while remaining flexible.
Impermeable for working in damp or greasy environments, enabling you to grip objects securely 2 zipped lower pockets.
Showa 690 Oil Resistant Long Sleeve Glove conform to: EN 420 Cat.III, EN 388 4.1.2.1., EN 374, EN 374-2 safety standards.
Features
- Fully coated, extra coating over entire hand
- Extended bonded sleeve, elasticated border
- Rough finish over entire surface
- Antibacterial and anti-odour treatment
- Special hydrocarbon treatment
- Eyelet for ventilation and hanging
- Length: 650mm
- Materials: PVC, Cotton liner
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN374 Protection Gloves Against ChemicalsTested and approved chemical gloves. Standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.