This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Himalayan H310 Fleece Lined Leather Thermal Work Gloves
These high quality thermal gloves are manufactured from full grain cow hide leather.
Himalayan H310 are fully lined with an acrylic fleece offering humidity and cold resistance for maximum warmth and comfort.
The winter gloves have an elasticated back and feature piping to protect the seams.
The thermal gloves are ideal for industrial cold weather handling, winter driving, skiing and ski resort work, freezer room and cold store work.
Excellent humidity, winter and cold resistance, quality product that is built to last.
Himalayan H310 Fleece Lined work gloves are suitable for both men and ladies.
Offers excellent tear and abrasion resistance.
Conforms to EN420 and EN388 2.1.3.2 safety gloves standards.
Sold in packs of 10 pairs.
Features
- ABRASION RESISTANCE: Level - 2.
- CUT RESISTANCE: Level - 1.
- TEAR RESISTANCE: Level - 3.
- PUNCTURE RESISTANCE: Level - 2.
- Edge binding.
- Fully fleece lined.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 2The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 3Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
Add your review
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.