Ansell Hyd-Tuff 52-502 Gloves

High performance, nitrile-impregnated glove. The Hyd-Tuff offers good resistance to abrasion, puncture, snags and cuts.

The nitrile coating repels grease, oil and dirt. The soft jersey lining gives excellent dry grip for safe, controlled handling.

The Hyd-Tuff has knitted wrist and safety cuffs.

These gloves are silicon free, antistatic and machine washable.

Compliant with EN 388 3.1.1.1 & EN 420, CAT 2. EN 1149 (antistatic).

This Ansell Hyd-Tuff 52-502 is alternative to the well-known Polyco Nifort 9712 Nitrile Coated Knit Wrist Glove.

Click 2000 PVCR16 PVC Coating 16'' General Handling Glove

A flexible and tough red PVC coating on a soft interlock lining.

Open cut gauntlet makes removal easy.

Design provides protection to the lower arm areas and wrist.

Multi-purpose general handling in oily, wet or dry conditions.

Phthalate free formulation and fully REACH compliant.

Overall length is 16" (40cm)

Click 2000 PVCR16 PVC Coating Wet & Oily Grip General Handling Glove conforms to: EN388 3.1.1.1.

Click 2000 PVCR18 PVC Coating Wet & Oily Grip 18'' General Handling Glove

A flexible and tough red PVC coating on a soft interlock lining.

Open cut gauntlet makes removal easy.

Design provides protection to the lower arm areas and wrist.

Multi-purpose general handling in oily, wet or dry conditions.

Phthalate free formulation and fully REACH compliant.

Overall length is 18" (46cm)

Click 2000 PVCR18 PVC Coating 18'' General Handling Glove conforms to: EN388 3.1.1.1. standards.

MAPA Neotex 340 Neoprene Latex Chemical Resistant Work Gauntlets

These gloves are designed for protection against numerous chemicals such as acids, bases, alcohols, petroleum solvents.

Freedom of movement: very comfortable high-quality cotton lining.

Multi-purpose chemical resistance (acids, aliphatic solvents) increased by heavyweight rubber coating.

Longer working-life for heavy-duty work.

Forearm protection: long cuff gloves.

High mechanical performance.

Mapa Neotex 340 Neoprene & Latex Chemical Resistant Gauntlets conforms to: EN420 Cat. II EN388 2.2.3.1 EN407 X1XXXX EN374 standards.

Ansell 32-105 Hynit Nitrile Fully Coated Abrasion Resistant Work Gloves

Ansell Hynit Slip-On Superior dry grip, no silicone, fully launderable and coloured cuffs

A comfortable, light, comfortable and longer-lasting replacement for leather and cotton gloves.

Special Ansell nitrile formulation, for excellent resistance to abrasion with excellent flexibility.

Liquid-repellent impregnation repels grease, dirt and oil.

Can be used in Automotive and Machinery, Metal fabrication and Mining.

Ansell 32-150 Hynit Fully Coated Work Glove conforms to: BS EN 388 3.1.1.1 and BS EN 420:2003 + A1:2009.

Showa KV660 Work Gauntlets Cut Resistant PVC Triple Coating

Hydrocarbon resistant gauntlet providing effective protection against cuts and chemical hazards.

Fully coated, extra coating over entire hand, seals and protects the hand against chemicals while remaining flexible

Impermeable for working in damp or greasy environments, enabling you to grip objects securely

Surface provides tactile feel and better grip

Antibacterial and anti-odour treatment for greater hygiene

Anatomical shape for easy movement and continuous wear

Seamless knit - No irritation by seams in contact with the skin

Extended protection on the forearm

Scalloped edge

Rough finish over entire surface

Special hydrocarbon treatment

DuPont™ Kevlar® fibre seamless liner

Triple-dipped PVC

Conforms to: EN 420 Cat 3 EN388:2016 4X42B EN ISO 347:2016/Type B JKL EN ISO 347-5:2016

Ansell ActivArmr 97-210 Offshore Work Gloves Impact Protection Waterproof Size 11

The 97-210 impact barrier, grip glove is designed to meet the extreme conditions of the rig floor, rig services and hydraulic fracking, the toughest conditions in the oilfield.

With lab tested state of the art impact protection on the back of hand, the gloves also provide technologically advanced “enhance grip” pads in strategic palm pressure points.

Also offers a water-resistant barrier to protect hands from fluids encountered in the upstream environment.

With the Ansell ActivArmr 97-210 you get it all: oily, dry and wet grip, cut protection, abrasion and protection from oil & water penetration.

Construction: Cut & Sewn

Liner material: Polyester

Finishing: Leather Palm, Thermoplastic Rubber

Cuff style: safety cuff

Length (mm): 294

Size: 11 – 2XL

Conforms to: EN 420:2003 + A1:2009 Cat. II EN 388:2003 2.2.2.2.

ATG MaxiFlex Cut 3 Cut Resistant Nitrile Foam Glove 34-8743

ATG MaxiFlex Cut Glove is a 25cm long, engineered seamless knit glove with premium nitrile coated foam grip on the palm and fingers.

A highly flexible glove like the very popular MaxiFlex Ultimate, but with additional cut resistance.

The new MaxiFlex Cut 34-8743 from ATG: you get protection and comfort with Cut 3 resistance.

The MaxiFlex® Cut is a super thin (just 0.75mm thick!) cut glove, so is very flexible, dexterous, and most important, comfortable.

ATG 34-8743 MaxiFlex Cut Protection Gloves complies to EN388 4.3.3.1 and EN420 safety standards.

Skytec Basalt R Gloves

Skytec Basalt R gloves combined with a PU palm are ideal for precision tasks requiring dexterity and flexibility.

They are resistant to tear and abrasion, with a secure grip any conditions (wet, oily or dry).

The Elasticated wrist provides a secure Flexible fit.

Breathable back of hand area is designed to provide a certain degree of ventilation and reduce perspiration build up.

To lower the risk of product contamination, the seamless nylon liner is lint-free.

Ansell HyFlex 11-500 Cut & Heat Resistant Kevlar Nitrile Coated Work Gloves

The Ansell 11-500 gloves provide an almost ‘second skin' closeness, helping to reduce the risk of snags and cuts.

This closeness gives the ability to handle sharp parts with confidence, increasing productivity and safety.

The nitrile-coated palm helps enhance your grip in damp or oily conditions and have good abrasion resistance.

These gloves are both silicone-free and natural rubber latex-free for worker and product protection.

It is designed for dry or slightly oily applications where workers need light cut protection, and in some cases, isolation from heat or flying molten metal debris.

Offering optimal comfort and a sure grip, the HyFlex 11-500 glove is the versatile choice for optimal productivity and safety.

Ansell HyFlex Cut2 Resistant Glove 11-500 conforms to: 407 X1XXXX EN388 3.2.3.1. Category III standards.

Mapa Harpon 326 gloves are suitable for long-term wear.

Very comfortable gloves due to the comfort of a textile support and good thermal insulation.

Comfort and safety when gripping heavy, rough or slippery objects in food industry.

Mapa gloves with high resistance to abrasion, exterior finish reinforced grip and interior finish textile support.

Reinforced grip for better handling, perfect for fish-handling, handling slippery products and oyster farming.

Certificate to mechanical hazards EN 388: 4.1.3.1; Heat and fire protection EN 407; General chemical protection EN 374.

Globus Torque Impact Flex Glove 3.2.3.1

Manufactured from a durable synthetic leather material.

Designed with hard TPR protection zones on fingers, thumbs and back of hand areas for impact protection.

The palm area of the glove is textured for extended grip.

High performing base that was designed with user comfort in mind.

The palm area is resistant to oils and water.

Conforms to EN388:2003 3.2.3.1 Safety Standard.

Redek General Handling Glove

A flexible and tough red PVC coating on a soft interlock lining.

Open cut gauntlet makes removal easy.

Design provides protection to the lower arm areas and wrist.

Multi-purpose general handling in oily, wet or dry conditions.

Phthalate free formulation and fully REACH compliant.

Overall length is 27cm (11”).

Conforms to: EN388 4.1.1.1.

Ansell Nitrotough N650 Fully Dip Knit Wrist Nitrile Work Glove

Ansell Nitrotough N650 Oil-repellent gloves with mechanical protection.

Nitrile supported glove with Interlock 100% cotton fleeced liner.

Strong and smooth Full coating glove with excellent abrasion resistance.

Ansell Nitrotough N650 Oil-repellent gloves conforms to EN388:2003 - 4.2.2.1 safety standards.

Available in size - 9 (Large) only.

MAPA Neotex 340 Neoprene Latex Chemical Resistant Work Gauntlets

These gloves are designed for protection against numerous chemicals such as acids, bases, alcohols, petroleum solvents.

Freedom of movement: very comfortable high-quality cotton lining.

Multi-purpose chemical resistance (acids, aliphatic solvents) increased by heavyweight rubber coating.

Longer working-life for heavy-duty work.

Forearm protection: long cuff gloves.

High mechanical performance.

Mapa Neotex 340 Neoprene & Latex Chemical Resistant Gauntlets conforms to: EN420 Cat. II EN388 2.2.3.1 EN407 X1XXXX EN374 standards.

Ansell 97-120 ActivArmr Safety Gloves Nitrile Impact Protection Size 11

Best gloves in class oil and impact protection. The ActivArmr® 97-120 gloves address workers’ top frustrations in rugged environments by delivering the best of both safety and comfort.

Outstanding mud-oil grip plus cut and impact resistance protects hands in extreme conditions, reducing fatigue and increasing productivity.

Specialized oil impermeable technology keeps hands clean and dry for all-day comfort that helps get the job done.

Feature Icons: Integrated glove feature icons allow for quick identification

High Visibility: Bright orange coloured exterior and reflective logo

Oil Impermeable Barrier: Repellency from drilling fluids and oils to keep hands clean and improve comfort

Enhanced Oil Grip: Mitigates hand fatigue and injury by addressing the #1 worker frustration for efficiency and safety

Impact Protection: Impact bumpers protect entire back of hand from medium-level impact injury to prevent loss time

Liner Material: Kevlar®, Spandex, Nylon

Coating Material: Nitrile

Finishing: PVC Bumpers, ¾ Dipped

Machine washable 40ºC

Conform to: EN 420:2003 + A1:2009 Cat.III EN 388:2003 4242 EN 388:2016 4242BP EN 407 X1XXXX

Available in size 11 only

Ansell 97-120 ActivArmr Safety Gloves Nitrile Impact Protection Size 8

Best gloves in class oil and impact protection. The ActivArmr® 97-120 gloves address workers’ top frustrations in rugged environments by delivering the best of both safety and comfort.

Outstanding mud-oil grip plus cut and impact resistance protects hands in extreme conditions, reducing fatigue and increasing productivity.

Specialized oil impermeable technology keeps hands clean and dry for all-day comfort that helps get the job done.

Feature Icons: Integrated glove feature icons allow for quick identification

High Visibility: Bright orange coloured exterior and reflective logo

Oil Impermeable Barrier: Repellency from drilling fluids and oils to keep hands clean and improve comfort

Enhanced Oil Grip: Mitigates hand fatigue and injury by addressing the #1 worker frustration for efficiency and safety

Impact Protection: Impact bumpers protect entire back of hand from medium-level impact injury to prevent loss time

Liner Material: Kevlar®, Spandex, Nylon

Coating Material: Nitrile

Finishing: PVC Bumpers, ¾ Dipped

Machine washable 40ºC

Conform to: EN 420:2003 + A1:2009 Cat.III EN 388:2003 4242 EN 388:2016 4242BP EN 407 X1XXXX

Available in Size 8 only

Ansell HyFlex® 11-818 Mechanical Protection FORTIX Nitrile Foam Coating Gloves

The ultra-thin FORTIX™ nitrile foam coating lasts up to three times longer than comparable coatings.

FORTIX™ nitrile foam coating extending glove life and reducing total cost of ownership.

The seamless 18-gauge nylon-spandex liner offering breathability, comfort and enhanced fingertip sensitivity for precision tasks.

The FORTIX™ coating provides enhanced dry grip and breathability for cooler, drier hands and less sweat.

Ansell ZONZ® Comfort Fit technology matches natural hand contours for improved support and range of movement.

Silicone-free material Gloves means no transfer of silicone contaminants to metal parts prior to painting.

The Ultra-lightweight HyFlex®11-818 offers ideal protection for a range of general handling and assembly tasks.

Ansell HyFlex® 11-818 Mechanical Protection Gloves conforms to: EN388:2003 4.1.2.1 and EN388:2016 3.1.2.1.A Safety gloves Standards.

Disclaimer: please note the images shown are for illustration purposes only; the colours \ design may be subject to changes by the manufacturer.