This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Ultimate Industrial V335 PVC Double Dipped Chemical Resistant Gloves
Excellent resistance to a wide range of chemicals and solvents.
The PVC Gauntlet V335 features a granular finish which improves grip.
Its increased thickness provides additional abrasion and wear resistance.
Thoroughly tested to EN1149-5 in hazardous environments.
The included Jersey fleece lining is comfortable, soft, warm and, with its Sanitized hygiene function, freshness is enhanced.
Fully REACH compliant and Phthalate free formulation.
Double Dipped PVC V335 Green Glove conforms to: EN420 Cat.3 EN388 4.1.2.1. EN374-2 EN374-3 JKL EN1149-5:2008.
Features
- Chemical Protection.
- Abrasion Resistance.
- Anti-Static.
- Conforms to EN1149-5.
- Useful in Wet/Oily/Greasy Conditions.
- Standards : 4.1.2.1.
- Water Resistant.
- Good Grip.
EN1149 Antistatic \ Electrostatic ProtectionProtective clothing with antistatic characteristics, protects against sudden discharges of electrostatic energy. Used where is a risk that static sparks may ignite inflammable substances.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN374 Protection Gloves Against ChemicalsTested and approved chemical gloves. Standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Actifresh gloves. Also you can check for more Gloves here - Cut resistance Gloves- Level 3. More safety products - you can check out our Accessories Category.