This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Ansell AlphaTec 08-354 Scorpio Neoprene Gauntlets
These liquid-proof industrial gloves offer a rough finish dip that makes handling wet, slippery materials easier and safer.
These Neoprene liquid-proof industrial gloves are extremely comfortable to wear.
Cushions the hand, absorbs perspiration and prevents chafing
Excellent wet grip. Safer handling means increased productivity
Exceptional flexibility. Easier to manipulate, less tiring to the hand incorporating easy donning and removal
Neoprene coating for a wide range of chemical protection
Textured finish for better grip on wet and slippery materials
100% liquid proof
Soft stretchy knit liner
Excellent wet grip: Safer handling means increased productivity
Coating Material: Neoprene
Length: 35cm - 14''
Conform to: EN 420:2003 + A1:2009 Category III EN 388:2016 3121B
EN 388:2003 3121 EN ISO 374:2016 AKLMNPT Type A EN ISO 374-5:2016
EN 407 X1XXXX
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 3The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN374 Protection Gloves Against ChemicalsTested and approved chemical gloves. Standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
EN407 Protection Against Thermal Risks: Heat/FireThis standard specifies thermal performance for protective gloves against heat and/or fire.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
Click here for the Delivery & Returns information.