Display per page
Display
12
Amblers

This fully waterproof safety boot has a padded collar and gusseted tongue with comfort lining and removable insole.

Crafted using water-resistant crazy horse leather, the inner liner is also waterproof.

A secure fit is provided by ‘locked-in lacing'.

The steel toe cap is impact and compression resistant and further protected by a PU textured toe guard, while the steel midsole is penetration resistant and the heel is totally shock absorbent thanks to a PU heel guard.

The sole, made from oil-resistant rubber/phylon, has deep patterned grooves which channel away grit and fluids, giving top SRC slip-resistance.

19641-30477

£66.62
No Risk

The No Risk Franklyn is a Black Waterproof, Breathable safety boot, with Sympatex lining.

It has a Dual Density PU outsole - Hardwearing, yet comfortable under foot.

Black, Smooth Full Grain, Premium, Waterproof Leather - Durable and flexible.

Roomy Steel Toe Cap - Protects your toes from up to 200J impact.

Steel Midsole - The midsole stops nails from puncturing the sole of your foot.

Breathable, Waterproof Sympatex membrane - Water cannot get through- so your feet stay dry; air can pass through - so your feet dont sweat!

Chromium-free leather insole.

Patented Clima Cork Footbed System - the No Risk patented Clima cork system moulds to your footprint. Its a great boot, with underlying comfort.

Conforms to: EN ISO 20345 S3 ST 579

ST579

£72.60
No Risk
No Risk Hillary S3 SRC Metal Free Waterproof Safety Boots Black Quick View
Hurry – low stock

NoRisk Hillary S3 SRC MetalFree Waterproof Safety Boot

No-Risk Hillary is a S3 Safety boot entirely metal-free that is essential for workers who need to go through metal detectors or work in environments where metal can become a hazard, plus the use of composite material gives the benefit of less weights therefore enhanced comfort.

The boot is also waterproof and breathable thanks to the Sympatex technology.

The Clima Cork System guarantees the maximum comfort for the wearer.

NoRisk Hillary Metal Free Waterproof Safety Boot conform to: EN ISO 20345:2011 S3 SRC safety standards.

ST591

£69.66
Snickers

Snickers Workwear 3214 Holster Trousers

Snickers Workwear 3214 Holster trousers are exceptionally hard wearing trousers ideal for rough work environments.

The fabric applied to manufacture these trousers is Canvas+, which is composed of 60% cotton and 40% polyester.

These fibres each have great benefits, and when combined, present wearers of the material with ease of care, durability, breathability and comfort.

Advanced cut with Twisted Leg design that anticipates your next move.

Kneepad pockets are designed for the KneeGuard positioning system for superior knee protection, and comes with extra material in the front for greater comfort.

PTR19SN

£98.95
Snickers

Snickers 3212 Trouser With Holster Pockets

Manufactured from 52% cotton & Polyamide 48% to provide comfort and durability.

Reinforced areas around the knees for improved wear and tear.

Kneepad pockets ideal for the KneeGuard knee pads.

Pockets include: One leg cargo pocket, Ruler Pocket, Two front pockets.

PTR07SN

Was £108.52
£87.52
Regatta

Regatta TRJ335 Holster Hardware Trouser - Black.

Regatta Hardwear Holster Trousers are a hard-wearing polycotton pair of trousers which are triple stitch reinforced at the seams, with polyamide reinforcements to add much needed strength and durability, with a waterproof finish.

The holster pockets are fold-away, making them easily concealed when they're not needed, and there are a number of pockets for storage, as well as knee-pad pockets.

PTR338PC

Was £32.02
£27.84
Snickers

Snickers Workwear 3312 Trouser are made in DuraTwill fabric.

Extremely hard-wearing work trousers made in dirt repellent DuraTwill fabric.

Features an advanced cut with Twisted Leg™ design, Cordura® reinforcements for extra durability and a range of pockets.

Knee pad pockets made for the KneeGuard positioning system for superior knee protection - Tough Cordura® reinforcements at the knees for extra durability.

Advanced cut with Twisted Leg™ design and Snickers Workwear Gusset™ in crotch for outstanding working comfort with every move.

Easy-to-access leg cargo pocket with separate mobile phone compartment and four pen/tool compartments.

Smart ruler pocket design with loose front corner for improved functionality and freedom of movement.

All hems folded down to prevent sparks and welding bi-products getting in.

PTR01SN

£90.08
Snickers
Snickers Workwear 3314 Cordura Durability Knee Pad Pockets Cargo Trouser Quick View
Hurry – low stock

Snickers Workwear 3314 Knee Pad Pockets Cargo Trouser

These Snickers trousers have been made with hardwearing Canvas+ fabric with added Cordura reinforcements for additional durability.

The knees are protected which come with knee pad pockets.

These trousers have a leg cargo pocket with mobile phone compartment, four pen compartments.

The smart ruler pocket with loose front corner.

PTR09SN

£74.08
Dickies

Dickies Redhawk WD814 Polycotton Action Trousers Knee Pad Pockets Work Wear

These are lightweight, comfortable trousers come with zipped pockets to secure your loose items.

They are made from hard wearing Polyester/Cotton.

Button and zip fastening fly front.

Plenty of pockets including zipped upper pockets, two zipped rear pockets and one zipped thigh pocket.

These trousers also have external pouches for knee pads.

DTR22DK

£20.69
Orbit International

Orbit International Hercules Polycotton Driver Jacket

Durable and lightweight canvas jacket will protect your clothes from dust and dirt.

Designed for drivers, warehouse operatives, electricians and general indoor workers.

PJK67PC

£13.46
Uneek

Uneek UC605 Rainproof Windproof Softshell Mens Reversible Fleece Jacket

The Uneek Reversible Fleece Jacket UC605 is a premium product at a competitive price tag.

A rich looking reversible jacket with a Elasticated Cuffs, Pull Cords and Toggles.

Adults Premium Reversible Fleece Jacket just right jacket for the workplace or on the go.

Uneek Reversible Fleece Jacket UC605 Fabric: 100% Polyester 300g/m².

PFL05BPC

£24.00
Sioen

The Sioen Terni 2672A Thermal T-Shirt comes with comfortable ribbed collar.

Ideal for extra thermal comfort in intense physical activity.

It uses a unique seamless design and round neck with a short sleeve.

Made from Sioen Siofit Thermal wear: Viloft 50% - 50% Polyester , 160 g / m² (Rib 1/1).

160 g/m2 .

PTS19PC

£19.93
Uneek

Uneek UC101 Polycotton Short Sleeve Classic Polo Shirt

The Uneek UC101 Polo Shirt is both a reliable and durable enough to wear in the working day.

Can be worn for work or casual wear.

Made from 50% Polyester 50% Cotton

It includes a 3 self-coloured button placket, a knitted collar, reactive dyed material, a taped neck for comfort.

Hemmed sleeve and bottom provides a neat, tidy appearance and is also washable at 60 degrees.

PPS170PC

£7.19
Orbit International
Orbit PS240 Ultar Polo Shirt Polyester Cotton Pique 240gsm Navy Quick View
Hurry – low stock

Orbit PS240 Polyester Cotton Ultar Navy Polo Shirt

The Fastrack 240gsm Polo Shirt is an ideal casual garment that can be worn everyday.

Ideal for working in warm weather during the summer months.

Taped back neck gives extra comfort around the neck.

Orbit PS240 Ultar Navy Polo Shirt made from 50% polyster, 50% cotton fabric.

PPS02PC

£6.94
Wenaas

Wenaas Falk Poloshirt 35146 100% Cotton

Made from 100% Cotton and you can choose from Various Colours: Navy, Royal Blue, Black

Classic polo shirt. “Half moon” in the neck, straight

Model with split in the side and three buttons in the neck.

A043100023

Was £8.48
£7.19
Premier

Pencarrie PR612 Premier Coolchecker Stud Polyester Polo Shirt

Comfortable design with neat hemmed sleeves.

Self fabric collar & a taped neck for extended comfort.

Placket consists of two rust free pop studs.

Stylish design suitable for anytime wear.

BPS06PC

Was £10.04
£7.84
Dickies

Dickies SH11125 Crew Neck Sweatshirt Navy

Provides a smart casual appearance whilst maintaining comfort.

Durable mid-weight fabric increases the products life span.

Neat and tidy design with Ribbed hem and cuffs.

Dickies SH11125 Crew Neck Sweatshirts are anufactured with 65% polyester & 35% Cotton.

DSS03DK

£11.45
Orbit International

Orbit Elbrus 340gsm Polycotton Long Sleeve Mens Sweatshirt

The Fastrack 340gsm Sweat Shirt is an ideal casual garment that can be worn everyday.

It's made from a warm polycotton material, elastane rib crew neck and ribbed cuffs for excellent comfort and fit.

Taped back neck gives extra comfort around the neck.

Orbit Elbrus Polycotton Long Sleeve Sweater Fabric: 50% Polyester 50% Cotton 340g/m².

PSS01PC

£7.72
Caterpillar

CAT CW10646 Trademark Sweatshirts is made from 80% Cotton, 20% Polyester

3 piece hood with draw cord for a tight and secure fit around head and face.

Front hand warmer pocket for those cold winter days.

Rib trim with spandex will adjust around the wearer for a snug fit every time.

19634-30462

£45.39
Blackrock
Blackrock 843010X PU Coated Gripper Glove En388 4.1.2.1 Quick View
Best Seller

Lightweight PU coated Gripper Glove

Manufactured using breathable material reducing the build up of odours.

The PU coating enhances the users grip and dexterity.

These gloves also protect the users for chemicals.

Conforms to EN420:1994 & EN388:1994.

PGG148GL

£0.58
Ansell

Ansell ActivArmr Hylite 47-400 Work Gloves ¾ Nitrile Coating

A versatile alternative to cotton jersey, light leather and PVC.

For extra comfort, ActivArmr® Hylite™ gloves feature interlock knit lining, generous sizing, and contoured designs

ActivArmr® Hylite™ gloves combine the comfort of a cotton or light leather glove with outstanding abrasion resistance and oil repellence of a nitrile coated glove

ActivArmr® Hylite™ gloves outwear cotton up to 12 to 1, light leather 5 to 1, and PVC-coated gloves 3 to 1

Special nitrile formulation provides an excellent combination of flexibility, mechanical resistance and oil repellency

Knitted cuffs ensure a firmer fit and prevent dust and debris from entering the glove

Natural hand shape makes it easier to wear for long periods

Silicone-free, ensures cleanliness of metal sheets: important in steel and motor industries

Antistatic

Coating material: Nitrile

Liner material: interlock cotton

Finishing: ¾ dipped

Cuff style: knitwrist

Machine washable 40ºC

Conforms to: Conform to: EN 420:2003 + A1:2009 Cat. II EN 388:2016 3111A

A201A11050

Was £3.8
£1.91
Beeswift

Beeswift Full Latex Coating Mens Hand Protection Extra Grip Gripper Work Gloves

With a 100% cotton liner this glove offers the maximum comfort, making long days at work much more tolerable

Ideal for general handling purposes suitable for working on many different tasks (multi-purpose).

The elasticated wrist band ensures a secure and comfortable fit for the user.

Manufactured with latex, which in turn improves the overall grip of this glove, ensures a strong grip in wet or dry conditions.

Beeswift LFCGGBL Multipurpose Latex Gripper Gloves conforms to EN388 3.1.2.1 Safety Standards.

PGG02GL

£2.65
Showa

Showa 380 Nitrile Foam Palm Coating Seamless Liner Hand Safety High Grip Gloves

The Showa 380 Nitrile Foam Grip glove provides strong grip.

The microporous nitrile foam embossed finish provides a strong grip in wet, dry or oily conditions.

The foam embossed finish and elasticated cuffs makes them comfortable.

A light, elastic, low-lint seamless glove which keeps its shape longer.

The coated palm side of the glove provides the necessary grip needed.

Protects the hand from oils, hydrocarbons, grease and abrasion.

Breathable back of hand to release perspiration.

Suitable in dry, wet, oily or greasy conditions, ideal for precision tasks.

Showa 380 Nitrile Foam Grip Gloves conforms to: EN 388:2003 3.1.2.1 safety gloves standards.

PGG60GL

£4.68
Marigold

Marigold Puretough P3000 Cut 3 Resistant Nitrile-PU Coated Wet Grip Work Gloves

Superb tactile handling glove.

Non slip grip along with Water and oil repellent coating.

Made from high performance and high visible fibres, using Techcor® Knitting Technology.

Sensitive grey water based mix synthetic compound palm fit coating.

Water and oil repellent treatment on both liner and coating.

Ideal for use in all mechanical handling applications.

Suitable for use in medium level thermal hazards.

Level 3 cut Resistant standard.

Marigold Puretough P3000 11-423 Glov approved to: BS EN 388:2003 4.3.3.2 and EN 407:2004. safety standards.

PGL71GL

Was £9.3
£7.50
Honeywell

Honeywell NorthFlex NF11HD Insulated Nylon Cold Grip Winter Gloves

Used for handling damp, oily or greasy parts in cold conditions.

Ideally suited to tasks where workers need protection from the cold, but don't want to give up comfort and dexterity.

Blue polyamide knitted glove 3/4 Black foam PVC HPT (hydropellent technology) coating Seamless brushed synthetic liner Elastic knitted wrist.

The ergonomic seamless knit construction conforms better to the natural shape of the hand for greater strength and durability, superior comfort.

The Polyamide yarn reduces linting for the most sensitive applications and can be easily laundered for extended use.

The foam PVC HPT is a soft, durable and flexible coating that repels liquids to provide a firm wet or dry grip.

Provides an excellent abrasion resistance equal to heavier gloves.

The 7 gauge brushed synthetic liner ensures superior insulation from the cold down to -20ºC.

Honeywell NorthFlex Cold Grip NF11HD Insulated Nylon Winter Gloves conforms to: EN 420 EN 388 : 2231 EN 511 : X2X.

PGG159GL

£4.96
Display per page
Display
12

Plumbing Clothing | HVAC workwear

Our range of plumbing workwear and HVAC safety clothing is suitable for those working in the HVAC sector or plumbing industry. We supply plumbing workwear from the best known brands such as 3M, Amblers, Ansell, Blackrock, Caterpillar, Dr Martens, Helly Hansen, Honeywell, Orbit, Snickers, Uvex.

Our range of plumbing workwear includes boots, shirts, hoodies, gloves, torches, trousers, jackets and respirators. Many of these clothing items have waterproof or water repellent functionality. This makes them an ideal solution for plumbers just like the Skytec Ninja glove that provides the user with strong grip in both wet and dry conditions.

In many cases plumbers can find themselves in poorly lit environments, to combat this you can choose from a range of torches like the Streamlight 61052 head torch providing exceptional light whilst leaving your hands free to work.

Our plumbers work trousers are all designed with kneepad pockets, allowing users to maintain comfort when kneeling at work. The Caterpillar Cat C1811033 is a prime example of this reducing plumbers knee strain.

OUr safety footwear is designed to giev you protection with flexibility. eg the V12 Plumber shoe is a smart looking, lightweight, flexible safety plumbing shoe. or the AMBLERS waterproof black safety trainer is a lightweight alternative to safety shoes.

The products in this category are approved to many different standards such as: EN388, EN420 and EN20345.

Not what your looking for? why not check out the rest of our products.


Category text fade

Sign up for our Newsletter / Receive Great Offers in your inbox