Display per page
Display
Delta Plus

Delta Plus Panoply SAULTS3 Safety Work Boots

Delta Plus Panoply SAULT S3 SRC black safety boots are built for extra width, protection, extra flexibility and comfort.

They are made from Black Water Resistant Leather.

The safety boots feature a 200 joule Steel Toe Cap with reinforced Toe protection incorporating a PU bump cap to the outer of the toe as well as a penetration resistant Steel Midsole Protection.

Additional features of the Delta Plus Panoply SAULTS3 work boots are an energy absorbing heel, Fuel Oil and solvent resistant, cleated outsole, for extra grip in demanding conditions.

The work boots are also water resistant and anti-static making them extremely versatile and suitable for use in a variety of situations.

The safety boots are ideal for use in the construction industry, the transport industry, by engineers, tradesmen, plumbers, etc.

Delta Plus Panoply SAULTS3 Safety Work Boots conforms to: EN20344:2011, EN20345:2011 S3 SRC.

A080103015

£32.64
Jallatte

Jallatte Jalaska J0266: possibly the most popular, premium tan safety rigger boot in the UK

The Jalaska J0266 by Jallatte: it has a high density, cushioning, dual density PU outer sole. The sole is also abrasion resistant.

The sole is also hydrocarbon, oil and grease resistant.

The Softane comfort mid-layer sole gives you progressive shock absorption.

The AP23 natural tan leather upper is premium, 2.4mm full grain leather. It is 3 x times more oil and water repellent than standard leathers.

The Jalaska comes with a Steel Midsole and steel toecap. It is fully antistatic.

This is an iconic, premium safety rigger boot, used widely within construction & oil sectors, worldwide.

We also stock the fur lined version of this boot : Jallatte Jalartic Rigger boot.

Certified to EN ISO 20345 S3. Made in France, proven all over the world.

A085J03002

Was £92.89
£82.20
Wenaas

Forma Oilmaster 1 Side-Zip Safety Boot

Original Wenaas Oil Master 1 Offshore Safety boot - the best zip & lace safety boot for bigger feet?

Lace and zip closure boots, full grain water resistant upper.

Non-metallic, composite toe cap, which is 50% lighter than the traditional steel one.

The full bellows tongue and the unique integrated ankle support system improves stability and safety.

Nitrile/PU sole, L protection nail protection - Metal free, chemicals and oil resistant can also withstand 300ºC (1 min.) contact.

Bump cap to extend safety and durability, Shock absorption in the heel area.

Forma Oilmaster 1 Side-Zip Safety Boot conforms to: EN ISO 20345, S3 protection.

A086F05067

Was £74.63
£61.68
V12

V12 Lynx Low Cut Metal Free Rigger Metal Free S3 Safety Boot

V12 Lynx Low Cut Metal Free Rigger S3 Safety Boot is made from a full grain supple cow hide water repellent upper.

Composite toe cap and midsole offers excellent protection that is also lightweight.

This boot is metal free making it very light on your feet, especially if its worn for long periods of time during the day.

It includes durable pull on loops, pneumatic back for comfort when flexing or walking.

Twin shock absorbing footbed is shaped to support and support the foot.

Complies to EN ISO 20345:2011 S3 HRO SRC safety standards.

VR696

Was £81.3
£68.32
Dunlop

The C462241 is a functional and well balanced wellington from Dunlop.

It is hardwearing and durable with steel toe cap and midsole protection for superb underfoot safety.

It is constructed with an insulated waterproof polymer upper which keeps you comfortable and warm.

It is resistant to oils and other chemicals and so is suited to a vast range of industrial environments.

Complies to ISO20345 and EN345 safety standards.

A132D17016

£43.87
Cofra
Cofra Off Shore Cold Insulated Composite Toe Cap S3 Side Zip Safety Boots Quick View
Hurry – low stock

Cofra Off Shore S3 HRO SRC Safety Boots

Manufactured with a water repellent leather keeping feet dry.

The footbed is constructed from soft scented polyurethane.

Exceptionally comfortable material, making the boots perfect for long hour days.

Toe cap is resistant to 200 J, granting superior protection.

The Toe cap and protective midsole are non-metallic.

Cold protection boots, Insulated against low temperatures.

The thermal comfort inside the footwear is granted thanks to the special polyurethane compound devised to give high insulation.

COLD DEFENDER PU/nitrile rubber Sole - resistant up to +300 C and to low temperatures up to -25 C.

Cofra Off Shore S3 HRO SRC Safety Boots conforms to: EN ISO 20345:2011 S3 HRO SRC safety standards.

ST1276

£93.05
Wenaas

Wenaas Forma Rainmaster Gore-tex Water Resistant S3 Safety Boot

This is made using the highest quality, premium, water resistant full grain leather with cordura textile.

Abrasion resistant.

Light aluminium toe cap (50% lighter than steel).

Double density TPU/PU sole.

The outer layer of the sole is TPU with high physical and mechanical properties.

The upper layer is soft expanded PU with resilient properties that emphasize the shock absorption capacity of the material.

Heat resistance = 120ºC.

Gel insert penetrating the mid-sole in the heel, absorbs the impact shock deriving from the foot movement.

Non metallic Kevlar® L-protection midsole.

GORE-TEX 4 layer GORE-TEX® membrane contains 1.4 billion of pores per square cm, big enough for moisture vapour to escape, but too small for wind, rain and snow to penetrate.

GORE-TEX is therefore wind and water proof and simultaneously they have breathing capacity.

A086F05084-39

Was £114.23
£95.20
Wenaas

Wenaas Forma Rainmaster Gore-tex Water Resistant S3 Safety Boot

This is made using the highest quality, premium, water resistant full grain leather with cordura textile.

Abrasion resistant.

Light aluminium toe cap (50% lighter than steel).

Double density TPU/PU sole.

The outer layer of the sole is TPU with high physical and mechanical properties.

The upper layer is soft expanded PU with resilient properties that emphasize the shock absorption capacity of the material.

Heat resistance = 120ºC.

Gel insert penetrating the mid-sole in the heel, absorbs the impact shock deriving from the foot movement.

Non metallic Kevlar® L-protection midsole.

GORE-TEX 4 layer GORE-TEX® membrane contains 1.4 billion of pores per square cm, big enough for moisture vapour to escape, but too small for wind, rain and snow to penetrate.

GORE-TEX is therefore wind and water proof and simultaneously they have breathing capacity.

A086F05084-40

Was £114.23
£95.20
Wenaas

Wenaas Forma Aqua Gore-Tex Water Resistant Safety Boot

Ankle boot with (lightweight) aluminium toecap.

Water Resistant & Breathable - High quality full grain leather upper.

Forma Aqua ankle boot with upper of full grain leather and some areas with cordura textile. High technology provides excellent comfort and the GORE-TEX membrane keeps you dry even in very humid climates.

Rubber bump cap toe and heel reinforcement for extra protection and duration.<.p>

Dual Density TPU/PU sole - exceptional abrasion resistance and ideal for environments where oils and solvents are used. <.p>

Aluminium Toe Cap protection tested to 200 joules impact.

Penetration resistant composite midsole plate tested to 1,100 Newton.

Wenaas Forma Aqua Gore-Tex Safety Boot conforms to: EN ISO 20345 S3 WR SRC safety standards.

A086F05083-40

Was £101.55
£83.17
Display per page
Display

Offshore Boots

Offshore boots are tough, well rounded boots manufactured to provide maximum protection to the user. The boots in this category do just that thing.

These offshore boots are manufactured from the toughest leather, with steel toe caps and a durable frame. Many have been specifically designed to be easy to put on and take off.

To do so a side zip has been implemented, boots such as the Wenaas Oilmaster has a side zip. This particular boot has a very good resistance to rough oily conditions.

Many of our offshore boots are waterproof, keeping the users feet dry in any condition which is ideal for those working offshore (Fishing, Oilrig, Rescue etc).


Category text fade

Sign up for our Newsletter / Receive Great Offers in your inbox