Display per page

Wenaas Thor S3 Safety Boot

Oiled leather finish for greater durability. Composite toecap which is 50% lighter than steel.

Soft L-protection® nail protection and a uniquely integrated ankle support system.

Dual density heat resistant PU/nitrile sole resistant to most chemicals. Scuff toecap gives added protection and prolongs the life of the boot.

The heel is composite, giving greater support to the wearer.

Limited stocks available, so buy them while you can!


Was £60.56
Cofra Lab S2 Safety Chemical Resistance Boot Quick View
Hurry – low stock

Cofra Lab S2 Safety Chemical Resistance Boot

Cofra Lab S2 Safety Boot Upper is made from water repellent ECOLORICA®.

SANY-DRY® breathable and abrasion resistant Lining, which absorbs and releases moisture.

Antistatic and anatomic POLY-BED footbed, it absorbs and releases moisture. The upper layer is made of antibacterial textile SANY-DRY® to prevent from bad odours.

Safety boots comes with protective steel Toe Cap - resistant to 200 J

Cofra Lab S2 Safety Boot comes with slip resistant, single-density polyurethane Sole

Cofra Lorica Safety Boot Conforms to: EN ISO 20345:2011, S2, SRC safety standards.



The Amblers FS513 white safety boot is super lightweight.

These are great value for such a high safety standards,- certified to EN ISO 20345 norm, with steel toe cap and S2.

The amblers FS513 features water-resistant uppers, SRC non slip soles, and an anti-bacterial lining and footbed.

Special low thread semismooth outsole - so that it does not pick up/carry dirt.

These boots are used widely within the food industry, hygiene and within pharma or tech sectors - where cleanroom, white safety footwear is required.



Amblers FS511 Unisex Safety White Shoes

Ergonomically designed, it offers hygiene, traction, safety and prolonged standing comfort.

Breathable, water-resistant microfiber upper with moisture wicking antibacterial lining.

Machine washable at 30°c to ensure stringent clinical and food industry hygiene standards.

Easy to wipe clean to prevent cross-contamination.

Can be considered in the same way as any cloth in order to plan periodical washing.

Revolutionary bonded antimicrobial technology, AEGIS Microbe Shield® provides protection against odour/staining/deterioration caused by bacteria, fungus and other micro-organisms.

Composite toe cap protection tested to 200 joules impact .

Ergonomically designed antibacterial cushioned insole with memory foam heel support.



The Dunlop 142VP Protomaster is a steel toe capped wellington from Dunlop’s range of safety footwear.

It incorporates a tough steel midsole, that is puncture resistant.

These wellingtons have a waterproof PVC/Nitrile construction which is tough and durable.

Offers a good level of puncture-resistance against rough vegetation.

It also has an energy absorbing heel which protects the joints on impact on slippery or uneven ground.

Complies to EN ISO 20345:2011.S5.SRA safety standards.



The C462241 is a functional and well balanced wellington from Dunlop.

It is hardwearing and durable with steel toe cap and midsole protection for superb underfoot safety.

It is constructed with an insulated waterproof polymer upper which keeps you comfortable and warm.

It is resistant to oils and other chemicals and so is suited to a vast range of industrial environments.

Complies to ISO20345 and EN345 safety standards.



The Acifort Heavy Duty Full Safety Wellington is a practical and durable industrial boot from Dunlop.

This Safety Wellington is resistant to acids such as cement and concrete.

It comes with the optimal grip out-sole, steel toecap and mid-sole.

100% waterproof and resistant to many common chemicals.

Includes a steel-tipped toe and steel midsole for impact and penetration protection.

Complies to EN ISO 20345:2011.S5.SRA safety standards.



Respirex Hazmax Biological Hazard Safety Wellington

A chemically protective anti-static boot with an integral steel toe cap and steel midsole

Green Hazmax chemically resistant compound shaft certified to EN 13832-3, NFPA 1991

Enhanced protection with a 200 Joule Epoxy coated Steel toe cap.

Seamless construction with a kick off lug and added shin protection.

Moisture-absorbing insole - reduces odour(removable and machine washable).

Knitted nylon lining for superior comfort.

Certifeid Chemical resistant to EN 943-1 (Chemical protective clothing).

Slip resistant vulcanised rubber sole to SATRA TM144 EN13287

Unique sole pattern avoids clogging and catching on rungs when climbing ladders


Was £85.84

Amblers FS100 Unisex Black Safety Wellington

Comfortable and practical safety wellington with steel midsole and steel toe cap protection.

Versatile wellington suitable for a huge range of industrial and farming applications.

Double density ribbing on the upper gives additional protection to the shin bone.

The cleated PVC sole offers very good slip resistance.

Suitable for both men and women.



The Acifort Heavy Duty Full Safety Wellington is a practical and durable industrial boot from Dunlop.

This Safety Wellington is resistant to acids such as cement and concrete.

It comes with the optimal grip out-sole, steel toecap and mid-sole.

100% waterproof and resistant to many common chemicals.

Includes a steel-tipped toe and steel midsole for impact and penetration protection.

Complies to EN ISO 20345:2011.S5.SRA safety standards.



The Dunlop Purofort Comfort Grip safety wellington is a specific work boot for the professional fishing sector.

Specially equipped to deal with adverse weather and work conditions.

It has a special, flat, anti-slip outsole profile that offers superb slip resistance to allow you to work safely on wet, slippery and dirty floors.

The smooth leg shaft is dirt-repellent and easy to clean.

The excellent cold insulation provides a lot of wearing comfort.

Includes a protective steel toe cap and steel midsole for impact and penetration protection.

Complies to EN ISO 20347:2012 O4 FO CI SRA safety standards.



The Protomastor FS1800171BV is a sturdy wellington from Dunlop.

It's made from a tough PVC/Nitrile upper.

It is fully resistant to minerals, vegetable oils and fats and blood, disinfectant and various chemicals.

The Protomastor conforms to EN ISO 20345:2011.SB.E.FO.SRA safety footwear standards.

Toe protection up to 200 joules impact and penetration resistance.

EN345 SB safety rating.



Dunlop A681331 HEVEA Acifort Safety Wellington

Acifort Classic Work Wellingtons from Dunlop with Toe and midsole protection.

A safety wellington with a very smooth shaft for excellent hygiene in the food industry/factory.

Easy to clean and sanitize shaft and sole.

Resistance to minerals, animal or plant oils and fats, blood, disinfectants, fertilizer and other various chemicals.



Dunlop Purofort CA61131 Safety Wellingto

A new generation of Purofort CA61131 boots for the Food Processing segment Industry.

The Dunlop FoodPro Multigrip boot has been specifically developed for food processing.

Easy clean thread for great hygiene practice, protection with temperatures as low as -20c, resistant to chemicals, fats & oils.

Extra smooth design and shaft: easy to clean, Anti-Bac Anti Bacterial Lining.

Specifically designed for orthopedic insole.

Resists Mineral, animal and vegetable oils and fats, manure, blood, disinfectants, solvents and various chemicals.

Dunlop Purofort CA61131 FoodPro Multigrip boots conforms to: EN ISO 20345:2011 S4 CI SRC standards.



Cofra Thermic S5 Safety Wellington Black

These extra-light compounded Wellington's resist very well to hydrolysis.

This boot to maintains its chemical and physical performance over time.

A scented essence is added to the compound to prevent nasty odours.

These boots are 100% metal free, has a slip resistant sole lowering chances of any accidents.

Protects against cold temperatures as low as -25°C.

Ideal for those tasks that require exceptional foot protection & comfort.

Cofra Thermic S5 Safety Wellington conforms to: EN20345 S5 CI HRO CR AN M SRC Safety Standards.



The Dunlop purofort wellington is both practical and functional.

Full insulation protection up to - 20 degrees C. Both tough and durable, it can be used in multiple environments.

Complies with EN345 and S5-CI safety standards. Oil resistant. Toe protection up to 200 joules of force.

Steel mid sole protection up to 1100 Newtons. Available in sizes 37 - 48.


Dupont Tyvek White Overshoe POS0 (10 Pairs) Quick View
Hurry – low stock

Overshoes Tyvek White POS0 X 20 pack (10 pairs)

Dupont Tyvek Overshoes are made from flash spun polyethylene to provide an excellent barrier against fine particles and fibres down to 1 micron in size.

They have an elasticated ankle for a secure fit and are both anti-static and low-linting.

Applications include:

Pharmaceutical handling

Chemical protection

Lead and asbestos removal

General maintenance & operations

Spray painting and general clean-up


Display per page

Chemical resistant Boots | Footwear

Select from our wide range of chemical protective safety footwear.

We have chemical resistant boots - such as the Respirex Hazmax safety wellingtons which are both EN13832-2 and EN 943-1 certified for use with chemicals.

We also have a range of lightweight safety boots that give exceptional protection against chemicals and other liquids.

Our inventory ranges from disposable shoe covers to chemical resistant boots. These protective products are ideal for those working around chemicals.

Category text fade

Sign up for our Newsletter / Receive Great Offers in your inbox