Display per page
Display
Honeywell

A top quality boot from Honeywell Bacou 783, this boot is one of our most popular brands and one of our biggest sellers.

These boots have fantastic features to keep your feet warm and dry at all times (BAC'RUN SPECIFIC PRO BTP).

Water resistant oiled full grain leather upper, will keep out moisture and water whatever the weather.

The 200J SPACIUM™ injected polymer toe cap, will protect your toes against falling objects.

The composite Toe cap is low in weight providing unhindered movement speed.

Dual density PU foam insole gives great performance for a soft, durable instep.

The dual density polyurethane will offer you brilliant slip resistance on a wide variety of surfaces.

Overall a fantastic boot which will give you great service, also offers great value for money.

This boot is S3 rated , protecting the user from any underfoot spikes like nails.

Complies with EN ISO 20345: 2011 S3 HI CI SRC safety standards.

Conclusion: This is an Excellent boot: it has true Comfort, Stylish and is Lightweightand Flexible.

A080B01007

Was £59.03
£47.99
Cofra

Cofra New Sheffield S3 Safety Boot

Rugged safety boot combines top rated safety standards with a comfortable, breathable lining, plus a cut resistant upper for an astonishing protection.

Water repellent leather upper with cut protection.

Padded collar and tongue for more comfortable and firm fit.

Breathable SANY-DRY® lining, antibacterial, it absorbs and releases moisture, abrasion resistant.

Rubber bump cap toe and heel reinforcement for extra protection and duration.

Steel toe cap protection tested to 200 joules impact and Steel midsole penetration resistant to 1,100 Newton.

Footbed with metatarsal support made of soft PU, full piece, antistatic, anatomic, removable, covered with cloth. The soft gel insert in the metatarsal area guarantees stability and comfort even on uneven surfaces.

Dual Density PU/Nitrile rubber sole: exceptional abrasion resistance and ideal for environments where oils and solvents are used. Heat resistant to 300C contact.

Cofra New Sheffield S3 Safety Boot conforms to: EN20345 S3 HRO CR SRC safety standards.


Conclusion: The Sheffield is particularly suited for use by glassworks, car industry & aluminium works - as the metatarsal area is covered with Kevlar - lightweight cut resistant protection. Inner Cut resistant Protection with SAWTECH

ST976

£65.21
U-Power

U-Power Enough S3 Safety Boot

Using Lorica leather and the New Safety Dry technology, this boot is both breathable and water resistant.

The lining is comprised of WingTex air tunnel textile lining material.

The toe is composite, perforated with breathable membrane.

The pierce-resistant non-metallic midsole is in soft P.U. for extra comfort.

U-Power Enough S3 Safety Boot conforms to: EN ISO 20345 : 2011 S3 SRC.

ST930

£47.14
U-Power
U-Power Scuro Grip S3 SRC Hiker-Style Safety Trainer Boots Quick View
Hurry – low stock

U-Power Scuro Grip S3 SRC Safety Boot

The UPower Scuro Super Grip full grain black leather work boot is an anti-static S3 compliant safety boot.

Its made from top quality materials that give the wearer long lasting protection whatever the weather.

These boots comply with the highest of safety standards.

Excellent value for money.

U-Power Scuro Grip S3 SRC Safety Boot conforms to: EN20345 S3 SRC standards.

ST944

£68.24
MSA

MSA V Gard Safety Helmet Hard Hat Push-Key Fit Adjuster White

The popular V-Gard features a high density polyethylene [HDPE] shell and a textile suspension.

Conforms to: EN397, EN50362, EN13463-1.

PLEASE NOTE THAT THIS PRODUCT IS VAT EXEMPT.

A171J22030

£8.52
MSA

MSA V Gard Safety Helmet Hard Hat Push-Key Fit Adjuster

The popular V-Gard features a high density polyethylene [HDPE] shell and a textile suspension.

Conforms to: EN397, EN50362, EN13463-1.

PLEASE NOTE THAT THIS PRODUCT IS VAT EXEMPT.

A171J22033

£9.81
Blackrock

Blackrock BRGTB Grampian Work Trousers

Manufactured with 300g poly-cotton materials with Teflon® stain resistant finish.

Stylish design, looks well throughout the day.

The combination of materials ensures a comfortable and durable experience.

Designed with Twin foldaway holster pockets to store tools and valuables.

Triple stitched seams for extra product strength and durability.

2 front cargo pockets with mobile phone and tool/pen divisions.

Also developed with front kneepad pockets, suitable for all generic kneepads.

PTR235PC

Was £44.38
£38.93
Dickies

Dickies Redhawk WD954 Polycotton Workwear Uniform Work Jacket

Smart, stylish design with two studded chest pockets.

The jacket is a smart, stylish design with numerous practical pockets for functionality.

YKK zip front with over placket, studded top and bottom.

Two studded chest pockets, one with inside mobile phone pocket.

Dickies Redhawk WD954 Men Work Jacket Fabric: 65% polyester, 35% cotton. 260g/m².

PJK106PC

£21.22
Uneek

Uneek UC101 Polycotton Short Sleeve Classic Polo Shirt

The Uneek UC101 Polo Shirt is both a reliable and durable enough to wear in the working day.

Can be worn for work or casual wear.

Made from 50% Polyester 50% Cotton

It includes a 3 self-coloured button placket, a knitted collar, reactive dyed material, a taped neck for comfort.

Hemmed sleeve and bottom provides a neat, tidy appearance and is also washable at 60 degrees.

PPS170PC

£7.19
Wenaas

Wenaas Falk Poloshirt 35146 100% Cotton

Made from 100% Cotton and you can choose from Various Colours: Navy, Royal Blue, Black

Classic polo shirt. “Half moon” in the neck, straight

Model with split in the side and three buttons in the neck.

A043100023

Was £8.48
£7.19
Orbit International

Orbit PS240 Fastrack Polyester Cotton Work Polo Shirt - White

The Orbit Fastrack 220gsm Polo Shirt is an ideal casual garment that can be worn everyday.

Ideal for working in warm weather during the summer months.

Taped back neck gives extra comfort around the neck.

Orbit PS240 Fastrack Polo Shirts are made from 50% Polyester 50% Cotton Pique 240g/m² fabric.

Raised detail on collar & cuffs.

PPS09PC

£6.79
MSA

MSA Original V-Gard 520 Short peak Safety Helmet with Fas-Trac

The popular V-Gard features a high density polyethylene [HDPE] shell and a textile suspension.

PLEASE NOTE THAT THIS PRODUCT IS VAT EXEMPT.

PR~A171M22048

£9.67
Honeywell

Honeywell Millennia Spectacle Anti-scratch Glasses

The Honeywell Millennia has a unique look and modern design.

It includes features such as Sensitive Tension Design which helps the spectacles grip your nose and stay firm and Parallel Vision Control.

These spectacles offer you complete protection with excellent visibility.

The Millennia has 100% UV filtration which protects the eyes in harsh sunlight

Complies to EN166, EN170 safety standards.

A153P29013

£7.31
Wenaas

Wenaas 6912 Protector-5 Nitrile Coated Cut 5 Abrasion Resistant Work Gloves

Suitable for work where protection from abrasion, liquid and cut resistance is required but good grip is also necessary.

Nitrile coated high level cut glove, Micro-foam coating offers excellent grip in oily conditions.

Nitrile dipped palm and fingers for fluid and abrasion protection, high Level 5 cut resistance.

Seamless design with Nitrile dipped palm and fingers - Excellent grip in oily conditions.

Wenaas Protector Cut Level 5 resistance Gloves 6-6912 conforms to: EN420:2003, CE Category 2, EN388:2003 4.5.4.3. standards.

A200O02073

Was £5.89
£4.79
Ansell

Ansell 70-225 Neptune Kevlar Gloves

This glove is made from high-tech Kevlar para-aramid short fibres, resulting in improved sensitivity and fit.

The seamless construction avoids irritation, and the use of short fibres offer extra comfort to the wearer.

The 100% DuPont Kevlar construction offers a very high cut resistance to weight ratio.

The use of Terry loop technique enhances heat insulation.

Thanks to the Neptune coating the glove fibres repel liquids, avoiding damage to the Kevlar strands and extending glove life.

The reinforced thumb welt increases abrasion resistance also adding to glove durability.

These ambidextrous gloves are fully washable and can be re-used many times.

Conforms to: EN 420:2003 + A1:2009, EN 388:2003 2.5.4.X, EN 407:2004 X1XXXX

Disclaimer: please note the images shown are for illustration purposes only; the colours / design may be subject to changes by the manufacturer.

PMS01GL

Was £11.13
£7.37
Skytec

A lightweight glove with a cut resistance level of 4.

Excellent grip in both wet and dry environments.

High resistance to abrasion and tear resistance.

Fits comfortbaly with the user.

Conforms to EN388: 2003.

Abrasion, Cut, Tear and Punture Grades : 4.4.3.2 .

PMS70MS

£11.38
Ansell

Ansell HyFlex® 11-435 Cut 5 Protection Work Glove

Perfect glove for handling of sharp-edged objects, pre- assembling, cutting of small dry or lightly oiled parts.

Manufactured using eco-friendly, water-based polyurethane coating.

These gloves have excellent cut resistance due to its glass fibre and nylon combination.

Provides the user with Level 5 Cut protection & Level 4 Abrasion Protection.

Ansell HyFlex® 11-435 Cut 5 Protection Work Glove conforms to EN388 4.5.4.2. standards.

PGG124GL

Was £15.07
£12.66
Blackrock

Blackrock 4400100 EVA Construction Gardening Safety Knee Pads

The Blackrock 4400100 EVA knee pads provide protection against impact on hard or rough surfaces, reducing wear and tear on the kneecaps.

Lightweight and durable thanks to the EVA material, convenient velcro fasteners will keep these in place all-day long.

PKN41PC

£8.42
Blackrock

Blackrock BRKP Internal Knee Pads

The Blackrock EVA foam knee pads are perfect for everyday use.

They are suited to fit most knee pad trousers, offering cushioned protection against hard flooring when kneeling at work.

Knee protectors from can be used with many work trousers.

These top quality knee pads will offer long lasting comfort and protection whilst working.

These knee pads are made from high quality materials, and give excellent protection against the stresses and strains of being on your knees for long periods of time.

Suitable for all overalls and trousers with kneepad pockets, these 19mm tick foam kneepads will help to reduce stress on the knees by providing a protective layer between the knees and the floor.

PKN27PC

£3.34
Orbit International

Orbit Fastrack PS240 Polyester Cotton Work Polo Shirt

The Orbit Fastrack 220gsm Short Sleeve Polo Shirt is an ideal casual Polo Shirt that can be worn everyday.

Taped back neck gives extra comfort around the neck.

Ideal for working in warm weather during the summer months.

Orbit PS240 Fastrack Short Sleeve Polo Shirts are made from 50% Polyester 50% Cotton Pique 240g/m² fabric.

Raised detail on collar & cuffs.

PPS11PC

£6.94
Wenaas

Wenaas Terry Wool Cold Insulation Mid Layer Zipper Work Wear Polo Jersey

Wenaas wool terry is developed as work underwear, with a focus on insulation against cold.

The inside of wool terry transports moisture well and the garment's synthetic outside increases durability.

Wenaas wool terry is a very comfortable garment that insulates well and dries on the body.

The fabric is shrink resistant and the garments can be machine washed.

A070100023

Was £28.55
£22.42
Orbit International

Orbit PS240 Fastrack Polyester Cotton Work Polo Shirt

The Orbit Fastrack 240gsm Polo Shirt is an ideal casual garment that can be worn everyday.

Ideal for working in warm weather during the summer months.

Taped back neck gives extra comfort around the neck.

Made from 50% polyster, 50% cotton.

Raised detail on collar & cuffs.

The 3 button placket allows this garment to be either casual or formal.

PPS04PC

Was £6.9
£5.75
Orbit International

Fastrack FG300 Batura Fleece Jacket

This Fastrack FG300 Batura fleece Jacket offers excellent value for money.

The full length zip and comfort cuffs provide additional weather protection.

This Medium weight 300gsm fleece comes with a warm 300gsm Antipil fabric.

The soft feel of the fabric provides the wearer with a comfortable versatile jacket that can be worn in a variety of climates.

The jacket comes with two conveniently positioned hip pockets with full zip closure.

PFL280PC

£14.33
Display per page
Display

Carpenter Workwear

In this category you can find a huge variety of high quality carpenter workwear, ideal for any building situation.

We only stock the best products from the best brands such as 3M, Alpha Solway, Amblers , Bolle, caterpillar, Honeywell, MSA and many more.

You can find all the essential PPE for carpenters in this category, like our range of helmets. The helmets here are lightweight, durable and highly protective. Many like the 3M Peltor G3000 are ventilated further improving user comfort.

In many cases carpenters find themselves in need of eye protection, hence our range of protective eyewear. The glasses found in this category are ideal for carpenters, they have been designed to resist against scratches, impact and most importantly particles. The Honeywell Adaptec is a great example of this.

The boots that can be found in this category are long lasting, toe cap protective safety boots that are suitable on any site. Manufactured from the most durable of leathers, many of these boots like the Timberland Split Rock are lightweight and flexible making them ideal for carpenters.

Our gloves have a high resistance to cuts among other things, the Wenaas Odin Extreme 6-6363 is certified to the highest cut resistance degree.

We also sell other clothing items such as Trousers , T-shirts, Kneepads

Not what your looking for? Then why not have a look at our full range of products :Footwear, Gloves, Glasses, Trousers, Jackets, Shirts, Helmets, Kneepads.


Category text fade

Sign up for our Newsletter / Receive Great Offers in your inbox