Display per page
Display
Ansell

Ansell Hyd-Tuff 52-502 Gloves

High performance, nitrile-impregnated glove. The Hyd-Tuff offers good resistance to abrasion, puncture, snags and cuts.

The nitrile coating repels grease, oil and dirt. The soft jersey lining gives excellent dry grip for safe, controlled handling.

The Hyd-Tuff has knitted wrist and safety cuffs.

These gloves are silicon free, antistatic and machine washable.

Compliant with EN 388 3.1.1.1 & EN 420, CAT 2. EN 1149 (antistatic).

This Ansell Hyd-Tuff 52-502 is alternative to the well-known Polyco Nifort 9712 Nitrile Coated Knit Wrist Glove.

A201A11054

£4.78
Ansell

Ansell HyFlex 11-920 Palm Coated Blue General Handling Glove

The Ansell HyFlex® 11-920 glove uses Ansell's grip technology to help prevent oil penetration and reduces the risk of dermatitis and liquid exposure.

The surface contact is increased, which helps both grip and control.

It's double coating offers high abrasion resistance and prevents any oil penetration to the hand.

These gloves are machine washable, giving them an extended life span

Microscopic channels in the glove coating guide away the oil resulting in a secure glove-to surface contact.

This allows the wearer to handle small and medium-sized components lightly coated with oil or lubricant in all confidence.

Incorporating all the essential features of the Ansell HyFlex glove range, wearers appreciate the outstanding fit, comfort and dryness, as well as the glove's excellent dexterity and tactility.

Ansell HyFlex 11-920 General Handling Glove conforms to: EN 388 3.1.3.1 safety standards.

PGG132GL

Was £4.94
£3.14
Ansell

Ansell 23-700 Orange Fully Coated Insulated Polar Grip Glove

A tough, durable winter glove that keeps hands protected and warm.

Polyurethane foam insulated for additional warmth and comfort.

The rough finish coating provides exceptional grip support.

Ideal for use in wet or dry conditions.

Resistance Grades( Abrasion : 4, Cut : 2, Tear : 2, Puncture : 1).

Conforms to EN374, EN388 4.2.2.1 & EN511.

PGG92GL

Was £17.81
£11.49
Ansell

Ansell 20-105 Seams Rite Glove

Unique design, seams on the outside leaving nothing but comfort on the inside.

Tough vinyl coating repels liquid and provides exceptional grip.

Textured surface for excellent grip and long wear.

Seamless soft jersey lining for comfort.

Highly resistant to abrasion, with a reinforced thumb area.

Machine washable gloves, will not shrink or harden.

Applications: Construction, Handling coarse and abrasive materials, Transport and general duties, Handling cut metal, Maintenance and machinery repair, Refuse disposal, Packaging.

Conform to: EN 388:2003 2111

DGL24GL

£6.13
Ansell

Ansell 52-590 Hyd-Tuf Winter Glove

Ansell 52-590 Hyd-Tuf Winter Glove are a high performance nitrile glove with excellent abrasion resistance.

Repels grease, grit and oil, while the soft, flexible jersey lining provides a comfortable fit while cushioning the hand.

Perspiration is absorbed keeping the hand dry and comfortable in warm weather.

These have excellent dry grip, making handling quicker and easier to manage.

Ansell 52-590 Hyd-Tuf Winter Glove complies to EN 388 3.2.2.2. and EN 1149 Category II safety standards.

A201A11057

Was £10.04
£8.10
Ansell

Extra tough Ansell gloves for heavy-duty jobs involving rough - abrasive materials. <.p>

The Ansell Hycron 27-602 is a big tough glove made using unique Ansell nitrile formulation. <.p>

Ansell nitrile is more durable than heavy-duty leather, offers superior resistance to abrasive and sharp materials. <.p>

Stronger and more flexible than PVC and provides excellent barrier to grease and oil. <.p>

Made without silicone, ideal choice to use in metals and motor manufacture. <.p>

Conforms to: EN 388: 4221 and EN 1149 standards.

PNT11GL

£3.54
Ansell

Ansell's Hyflex 11-800 Safety Glove

Ansell’s best selling glove, provides an unforgettable experience.

Manufactured using nitrile foam to enhance grip and comfort.

Ideal for tasks that require precision such as assembly and general handling.

Advanced knitting technology allows the glove to stretch at will.

Conforms to EN388, Safety Grades : 3.1.3.1

PGG05GL

Was £3.11
£2.34
Ansell

Ansell HyFlex® 11-120 ESD Outstanding Comfort & Product Protection from ESD Work Gloves

The HyFlex® 11-120 gloves are especially designed for micro-electronic work where electro-static discharge (ESD) must be avoided.

The super-thin design gives improved handling of small components.

The nitrile foam coating keeps surfaces will stay clean and uncontaminated.

Elasticated cuff provides a tight secure fit around the wrist.

Ideal for electronic industries, painting, and mechanical work.

Ansell HyFlex® 11-120 ESD work gloves conforms to: EN 388 3.1.3.1. Antistatic according to EN 1149-5 Safety Standards.

PGG136HD

Was £4.36
£3.52
Ansell

Ansell 11-618 HyFlex Ultra Lite Work Glove General Handling

It Offers outstanding comfort and sensitivity for the most delicate handling.

The lightest lined and coated glove ever made by Ansell, 20% lighter in weight than Ansell's previous nylon/polyurethane gloves.

Designed for a wide range of lightweight applications in dry or slightly oily environments.

Ideal for workers who need a higher level of touch, dexterity and precision than that offered by their current gloves.

Ansell 11-618 HyFlex Ultra Lite Work Glove complies to EN388 3.1.2.1 safety standards.

A201A11118

£3.25
Ansell

Ansell 11-840 HyFlex with FORTIX Nitrile Foam Coated Gloves

The tough 1.1 mm FORTIX® nitrile foam coating offers EN Abrasion Level 4 protection, with up to three times the abrasion performance of other lightweight, knit-dipped gloves.

The FORTIX® coating is 20% more breathable than earlier formulations, for cooler, drier hands and less sweat.

The snug, second-skin liner is tailored to create a more comfortable wearing experience.

The HyFlex® 11-840 is an ideal solution for workers who move between tasks.

Silicone-free material means no transfer of silicone contaminants to metal parts prior to painting.

Complies to EN388 4.2.3.1 safety standards.

PGL124GL

£4.14
Ansell

Ansell 11-900 Hyflex Nylon Oil Repellent Nitrile Palm Coating Work Gloves

Oil repellency and Abrasion resistance are the key characteristics of this HyFlex® 11-900 Glove.

Keep oil out - the nitrile coating prevents oil from penetrating through the glove, protecting your hands from dermatitis.

Designed specifically for use in moderately oily manufacturing and maintenance environments where protection combined with a dry only grip and abrasion resistance are essential.

When workers need secure handling with comfort in these environments, the Ansell HyFlex 11-900 work glove delivers excellent results.

The Glove offer agronomical fit and has excellent dry grip for applications involving small or medium sized parts.

Perfect gloves for Automotive assembly, General Carpentry, Masonry/Tile, Plastics, Warehousing and Metal fabrication.

Ansell Marigold 11-900 Hyflex Work Gloves Approved according to: EN 388 3-1-3-1; Abrasion ANSI class 4.

PGG208GL

Was £3.66
£2.23
Ansell

Ansell 70-325 Neptune Yellow Polka Dot Kevlar Glove

Manufactured from high quality Kevlar para-aramid for improved protection.

The addition of Kevlar makes these gloves impact resistant, heat resistant and cut resistant.

With the addition of Neptune coating these gloves can repel liquids.

This handmade seamlessly knitted glove is exceptionally comfortable.

PVC dots both sides for improved grip.

Ansell 70-325 Neptune Yellow Polka Dot Kevlar Glove conforms to EN388 1.3.4.X and EN407 standards.

PMS30GL

Was £6.83
£5.99
Ansell

Ansell 11-616 HyFlex PU Palm Coated General Handling High Grip Work Gloves

Designed for a wide range of lightweight applications in dry or slightly oily environments, it is ideal for workers who need a higher level of fit, touch and precision than that offered by their current gloves.

Ansell 11-616 Hyflex lightweight is the next generation glove in comfort, dexterity and flexibility.

Ideal for light assembly work, electrical goods, finishing works and picking/fitting small pieces.

18-gauge knitting technology gives this ultra-thin glove to be strong and durable.

Great for applications where cotton gloves or no gloves at all are used.

Made from Polyurethane coating & Nylon inner lining

Ansell 11-616 Hyflex Ultra Lite Glove complies to EN388:2121, EN1149 safety standards.

PGG115GL

£3.25
Ansell

Ansell 11-600 Hyflex White Work Gloves Antistatic PU Palm Coating

Maximal dexterity and sensitivity for the most delicate handling

Ansell’s HyFlex industrial gloves are designed for light and delicate applications in dry environments that require maximal levels of dexterity

Like a second skin, they offer comfortable and exact handling of small objects

They also ensure product protection from glove-generated debris, and cross-product contamination

When you need precision and/or clean handling, HyFlex 11-600 gloves are the answer

Offered in white for dirt sensitive application

Knitted cuffs for a firmer fit and prevent dust and debris from entering the gloves

Antistatic

Liner material: Nylon 15 gauge

Coating material: Polyurethane

Machine washable 40ºC

Conform to: EN 388:2003 3131 EN 388:2016 3121A EN 420:2003 + A1:2009 Category II

PGG93GL

£1.71
Ansell

Ansell 32-105 Hynit Nitrile Fully Coated Abrasion Resistant Work Gloves

Ansell Hynit Slip-On Superior dry grip, no silicone, fully launderable and coloured cuffs

A comfortable, light, comfortable and longer-lasting replacement for leather and cotton gloves.

Special Ansell nitrile formulation, for excellent resistance to abrasion with excellent flexibility.

Liquid-repellent impregnation repels grease, dirt and oil.

Can be used in Automotive and Machinery, Metal fabrication and Mining.

Ansell 32-150 Hynit Fully Coated Work Glove conforms to: BS EN 388 3.1.1.1 and BS EN 420:2003 + A1:2009.

DGL25GL

Was £2.67
£2.34
Ansell

Ansell ActivArmr 97-210 Offshore Work Gloves Impact Protection Waterproof Size 11

The 97-210 impact barrier, grip glove is designed to meet the extreme conditions of the rig floor, rig services and hydraulic fracking, the toughest conditions in the oilfield.

With lab tested state of the art impact protection on the back of hand, the gloves also provide technologically advanced “enhance grip” pads in strategic palm pressure points.

Also offers a water-resistant barrier to protect hands from fluids encountered in the upstream environment.

With the Ansell ActivArmr 97-210 you get it all: oily, dry and wet grip, cut protection, abrasion and protection from oil & water penetration.

Construction: Cut & Sewn

Liner material: Polyester

Finishing: Leather Palm, Thermoplastic Rubber

Cuff style: safety cuff

Length (mm): 294

Size: 11 – 2XL

Conforms to: EN 420:2003 + A1:2009 Cat. II EN 388:2003 2.2.2.2.

PGL43GL

£26.53
Ansell

Ansell 52-547 Hyd-Tuf Nitrile-Coated Jersey Rigger Glove

Ansell Hyd Tuf nitrile rigger style gloves feature NBR-coated jersey cotton material and knitted wrist and safety cuff styles.

Comfortable, flexible, and hard-wearing, these gloves are antistatic and Safely machine-washable

Will not shrink, stiffen or lose its shape.

Jersey Lining absorbs perspiration, keeping the hand dry and comfortable for longer periods.

More hygienic and longer lasting these gloves can safely and economically be re-used.

Complies to EN 388 3.1.1.1 & EN 1149 safety standards.

A201A11056

£4.72
Ansell

Ansell HyFlex 11-500 Cut & Heat Resistant Kevlar Nitrile Coated Work Gloves

The Ansell 11-500 gloves provide an almost ‘second skin' closeness, helping to reduce the risk of snags and cuts.

This closeness gives the ability to handle sharp parts with confidence, increasing productivity and safety.

The nitrile-coated palm helps enhance your grip in damp or oily conditions and have good abrasion resistance.

These gloves are both silicone-free and natural rubber latex-free for worker and product protection.

It is designed for dry or slightly oily applications where workers need light cut protection, and in some cases, isolation from heat or flying molten metal debris.

Offering optimal comfort and a sure grip, the HyFlex 11-500 glove is the versatile choice for optimal productivity and safety.

Ansell HyFlex Cut2 Resistant Glove 11-500 conforms to: 407 X1XXXX EN388 3.2.3.1. Category III standards.

A201A11003

£7.38
Ansell

Ansell 11-627 Hyflex Dyneema Cut Resistant PU Coated Work Gloves

Highly cut resistant due to the addition of Dyneema during construction.

The glove delivers a perfect balance of comfort and sure handling with superior cut resistance.

Dyneema® and LYCRA® liner provides cool and comfortable feeling.

Designed to optimise comfort and to ensure secure grip during handling.

The polyurethene coating along with the liners make this glove very flexible.

Excellent grip in dry environments and effective control in minimally oily environments.

Ansell 11-627 Hyflex Cut Resistant Glove conforms to EN388 4.3.4.2 Safety Standards.

A201A11007

Was £10.24
£7.76
Ansell

Ansell 70-205 Neptune Kevlar Anti-Cut Ansell Cut Level 3 Glove

Designed to provide superior mechanical durability during heavy duty tasks.

Manufactured with a kevlar material which is impact resistant, strong, heat resistant & cut resistant.

With the addition of neptune coating these gloves can repel liquids.

Abrasion resistance is improved with the addition of the reinforced thumb welt.

Amidextrous design, these gloves are also machine washable.

Ansell 70-205 Neptune Kevlar Anti-Cut Safety Glove conforms to EN388 1.3.4.X and EN407 protection standards.

PSP02GL

Was £6.54
£4.88
Ansell

Ansell 70-225 Neptune Kevlar Gloves

This glove is made from high-tech Kevlar para-aramid short fibres, resulting in improved sensitivity and fit.

The seamless construction avoids irritation, and the use of short fibres offer extra comfort to the wearer.

The 100% DuPont Kevlar construction offers a very high cut resistance to weight ratio.

The use of Terry loop technique enhances heat insulation.

Thanks to the Neptune coating the glove fibres repel liquids, avoiding damage to the Kevlar strands and extending glove life.

The reinforced thumb welt increases abrasion resistance also adding to glove durability.

These ambidextrous gloves are fully washable and can be re-used many times.

Conforms to: EN 420:2003 + A1:2009, EN 388:2003 2.5.4.X, EN 407:2004 X1XXXX

Disclaimer: please note the images shown are for illustration purposes only; the colours / design may be subject to changes by the manufacturer.

PMS01GL

Was £11.13
£7.37
Ansell

Ansell 11-624 HyFlex Grip Dyneema Cut Protection Hand Safety Work Gloves

Perfect balance of comfort and sure handling with superior cut resistance EN Level 3.

Clove can be washed and re-used without loss of cut resistance.

Polyurethane coating designed for use in dry, as well as slightly oily environments and provides sure grip in dry or light oil properties.

Ansell Hyflex 11-624 White Black Dyneema Glove conforms to EN 388 4.3.4.2. Category II safety standards.

PGL52GL

Was £8.54
£7.43
Ansell

Ansell 11-625 HyFlex PU Palm Coated Hi Dry-Wet Grip Cut 3 Protection Work Gloves

Well balanced design delivers superior comfort and protection simultaneously.

The liners used contains Dyneema which offers very high levels of cut resistance.

Manufactured with a polyurethane coating improving the gloves overall flexibility.

Ideal for Glass handling & general handling of sharp goods.

Ansell 11-625 Hyflex Palm Coated Work Glove conforms to EN 420:2003 + A1:2009 and EN 388:2003 4.3.4.2 Safety Standards.

A201A11006

Was £9.03
£7.99
Ansell

Ansell PowerFlex 80-400 Insulated Latex Palm Coat Hi Vis Extra Grip Work Glove

This Hghly visible glove provides excellent insulation and comfortable handling in cold conditions.

Suitable in both wet and dry conditions.

Highly Resistant to Abrasion and Cut.

Ansell’s PowerFlex 80-400 glove is a general-purpose glove that is designed to provide outstanding insulation from cold conditions, as well as high comfort and grip.

This glove combines a thermal terry loop acrylic liner with a naturally insulating latex coating, ensuring excellent insulation against the cold.

Additional insulation added for protection against temperatures as low as -30° C.

The well planned ergonomic design provides a superior fit, comfort, flexibility and dexterity.

Ansell Powerflex Insulated Glove 80-400 conforms to: EN 388 0.2.3.1, EN 407:X2XXXX, EN 420:2003 A1:2009, EN 511 020 safety standards.

PGG125GL

Was £7.31
£5.99
Ansell

Ansell HyFlex® 11-518 Dyneema Palm Coated Grip Cut Resistant Work Gloves

The lightweight 18 gauge liner gives 'bare-hand' like freedom.

This cut 3 glove offers maximum protection yet allows high tactility.

Designed to be both ultralight and ultrathin, allowing for free unhindered movement.

The polyurethane coating has high abrasion resistance, extending the life-span of the glove.

Ansell 11-518 Hyflex Ultra Lite Glove conform to EN 388 : 3.3.3.1 standards.

PGG114GL

Was £12.31
£9.54
Display per page
Display

Ansell Safety Gloves

Ansell protective gloves - for all industrial sectors

Ansell Healthcare is the world's largest manufacturer of protective gloves.

Ansell gloves are the result of advanced research to provide solutions for any kind of task that requires protection for your hands.

Ansell has developed specific glove technologies:
Mechanical Protection Gloves
Chemical Protection Gloves
Impact Protection Gloves etc.


What Ansell says: "Ansell has led the gloves industry with Ideas that Fit for more than 100 years. Ansell product innovations have helped a wide range of industries reduce worker injuries and boost productivity".

What we say: Ansell performance is excellent and quality is impeccable. The Hyd-Tuf, the Touch n Tuff are amongst some of the best recognised gloves on the market. Ansel ActivArmr Mad Impact gloves show that Ansell continues to innovate.


VIEW OUR Ansell Work Gloves BUYERS GUIDE HERE


Category text fade

Sign up for our Newsletter / Receive Great Offers in your inbox