This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Polyco Reflex K Plus Safety Work Gloves Cut Resistant Latex Coated
Cut resistant work gloves with a crinkle latex coating and a breathable knitted liner.
DuPont™ Kevlar® fibres provide increased protection against cuts, slashes and abrasion, whilst maintaining a high degree of dexterity for the wearer
The heavy-duty performance is enhanced by the durable latex palm coating
Crinkle finish for an excellent grip in both wet and dry conditions for safe and secure handling
Seamless knitted liner with uncoated back of the hand promotes comfort and breathability
Latex coating is also very flexible minimising hand fatigue in prolonged use
Elasticated knitted wrist provides a secure fit and keeps dust and debris from entering the glove
Conform to: EN 420:2003 + A1:2009 Cat. II
EN 388:2016 3X44F EN 388 3443
EN 407:2004 X2XXXX
Disclaimer: please note the images shown are for illustration purposes only; the colours / design may be subject to changes by the manufacturer.
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 3The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 4Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 4Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN407 Protection Against Thermal Risks: Heat/FireThis standard specifies thermal performance for protective gloves against heat and/or fire.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from Polyco gloves. Also you can check for more Gloves here - Vibration Protection Gloves. More safety products - you can check out our Polycotton Overalls Category.