This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Ansell Multiplus 40cm Chemical Resistant Gauntlet PVC Nitrile Gloves
Superior plasticized plastoprene integral base coating, made of a mix of resins and plasticizers with incorporated elastomers.
Manufactured from a PVC formula with a double dip granite finish.
Exceptionally comfortable with 100% cotton interior lining.
Excellent resistance to many chemicals, including cutting oil, petrol products, bases and acids.
Extended gauntlet to provide additional lower arm protection.
Provides excellent resistance to abrasion and tear.
For all tasks involving mechanical and chemical hazards (cutting oil, fats, acids, alkalis, solvents).
Manufactured under EC quality assurance system carried out by the BSI body.
Conforms to: EN420 (general requirements), EN388 (mechanical hazards) 4.1.2.1 and EN374 (chemical and microbiological hazards)
Features
- PVC construction.
- 100% cotton lining.
- double dip granite finish.
- Highly resistant to chemicals.
- Resistant to Abrasion & Tear.
- Extended Gauntlet.
- Lenght: 40cm
- Available in size 8 only
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 1Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 2Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 1Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN374 Protection Gloves Against ChemicalsTested and approved chemical gloves. Standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
Add your review
| Glove Size | XSmall | Small | Medium | Large | XLarge | XXLarge |
|---|---|---|---|---|---|---|
| Glove Size | 6 | 7 | 8 | 9 | 10 | 11 |
| Hand Circumference (mm) (A) | 152 | 178 | 203 | 229 | 254 | 279 |
| Hand Length (mm) (B) | 164 | 171 | 182 | 192 | 204 | 215 |
Click here for the Delivery & Returns information.
If you cannot find your product from marigold gloves. Also you can check for more Gloves here - Electrician Gloves. More safety products - you can check out our Disposable Overalls Category.