This website uses cookies. By navigating around this site you consent to cookies being stored on your machine.
Learn more
Title (Qty) | Price |
| Your Basket is empty. | |
Sub Total | £0.00 |
Shipping Total | £0.00 |
Discount | £0.00 |
Total | £0.00 |
Eureka 13-4ESC Edge Supracoat Cut Resistant Gloves
General handling gloves with the added safety of a level 4 cut resistance.
Elastic fit
Moderate puncture resistant
Very good dry and wet grip
Good breathability
Glove Thickness: Back of hand: 1.0mm, Palm: 1.4mm
Colour: Grey Melange
Materials: Supracoat, waterborne and DMF free PU and Nitrile foam
Outside: Nylon / fibreglass
Inside: Spandex and SupraBlock Cut (Patented high performance PVA)
Conform to: EN 420:2003 + A1:2009 Cat. II EN 388:2003 4542
EN388 Protection Gloves Against Mechanical HazardsDefines the protection given against mechanical and physical hazards. Testing methods - abrasion - perforation resistance - tear resistance - cutting resistance
EN388 Resistance to Abrasion Level 4The protection factor is indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
EN388 Cut Protection Level 5Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
EN388 Tear Resistance Level 4Based on the amount of force required to tear the sample glove. The protection factor is then indicated on a scale from 1 to 5.
EN388 Puncture Resistance Level 2Based on the amount of force required to pierce the sample glove with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
EN420 General Requirements Protective GlovesThis standard defines the general requirements under testing such as; Innocuousness, Construction of glove and Water Resistance
Reviews
There are no reviews for this product yet.
Click here for the Delivery & Returns information.